Browning 1-5/16"-ID QD SH-STYLE BUSHINGS BRW SH-1.5/16
Sure-GripĀ® quick detachable bushings are easy to install and remove. Split-through flange and taper provide a true clamp on the shaft that is equivalent to a shrink fit. All sizes except JA and QT have a set screw over the key to help maintain the bushing's position on the shaft until the cap screws are securely tightened. Versatile Sure-GripĀ® bushings permit the mounting of the same mating part on shafts of different diameters and the mounting of different sheaves on the same shaft using the same bushing.
-
BrandTB Wood'sĀ®
-
UPC698672700238
-
Manufacturer Part NumberSH15/16
-
CountryUSA
-
MaterialSteel
-
Flange Diameter2-11/16 in
-
Flange Thickness3/8 in
-
Torque Rating3500 in-lb
-
TypeStandard
-
Screw Size1/4-20 x 1-3/8 in
-
Number of Bolt Holes3
-
Barrel Diameter1.871 in
-
Keyway Size1/4 x 1/8 in
-
Bolt Circle Diameter2-1/4 in
-
Bore Diameter15/16 in
-
Overall Length1-1/4 in
- Size SH bushing
- 6-hole drilling makes installation and removal quick and easy
- Keyseat 180 deg from split, precise taper provides proper wedging action
- Saw cut through flange and taper to provide a true clamp fit
- Cap screws used to secure bushings to sheave and to remove bushing from sheave
- Permit four-way mounting
- Easy installation and removal
-
UNSPSC31171605
-
Catalog
-
Instruction/Installation Manual
Recently Viewed
Sure-GripĀ® quick detachable bushings are easy to install and remove. Split-through flange and taper provide a true clamp on the shaft that is equivalent to a shrink fit. All sizes except JA and QT have a set screw over the key to help maintain the bushing's position on the shaft until the cap screws are securely tightened. Versatile Sure-GripĀ® bushings permit the mounting of the same mating part on shafts of different diameters and the mounting of different sheaves on the same shaft using the same bushing.
SealmasterĀ® two and three piece rod end bearing housing designs have been optimized for overall strength. This housing advantage and variety of outer race materials including brass, steel, DelrinĀ® and PTFE liners provide a wide selection of application solutions. SealmasterĀ® rod end bearings can be joined together or connected with a threaded rod or tube as linkage assemblies for flexibility in motion transfer. In addition SealmasterĀ® rod end bearings can accommodate angular misalignment to provide ease in assembly and smooth motion transfer in a variety of applications.
Installed at floor level to allow water to flow into your sewage drainage system.
Rust-OleumĀ® V2333838 V2300 System Solvent-Based Inverted Striping Paint, 15 oz Container, Liquid Form, Fluorescent Green, 300 to 350 linear ft/gal with 1-1/2 in W Stripe Coverage
AlemiteĀ® 1629-B Lubrication Fitting, 1/4-18 PTF Thread, 31/32 in OAL, 11/32 in L Shank, Steel, Trivalent Zinc Plated
AlemiteĀ® 1629-B Lubrication Fitting, 1/4-18 PTF Thread, 31/32 in OAL, 11/32 in L Shank, Steel, Trivalent Zinc Plated
