Browning 1-GRV 1/2"-ID A OR B-BELT SHEAVES BRW BK-28 X 1/2
Browning® Classical Gripbelt® 1027952 BK Series Type 2 Single Groove Sheave, Finished Bore, 1/2 in Dia Bore, 2.95 in OD, 2.4 in (A)/2.9 in (B) Dia Pitch, 13/16 in W Face
-
BrandBrowning®
-
UPC662289157655
-
Manufacturer Part Number1027952
-
CountryUSA
-
Face Width13/16 in
-
Pitch Diameter2.4 in (A)/2.9 in (B)
-
MaterialCast Iron
-
TypeType 2
-
SeriesBK Series
-
Hub Projection13/32 in
-
Outside Diameter2.95 in
-
Bore Diameter1/2 in
-
Bore TypeFinished
-
Overall Length1-7/32 in
-
Suitable For Use With4L/A and 5L/B Cross Section Belt
- Largest Selection of finished bore sheaves of any other manufacturer - Browning offers finished bore sheaves in both A and B Combination (A/B) configuration
- 1 and 2 Grooves are available to meet any fractional horsepower requirement
- Combination Groove - All Browning BK Sheaves permit the running of A, 4L, B and 5L Belts to be run in them, thus providing a variety of different pitch diameters and horsepowers
- Tighter tolerances by 25%
- Twice balanced after assembly
- Tightened micro-finish on groove walls for increased belt life
- 1 and 2 Grooves are available to meet any fractional horsepower requirement
- Combination Groove - All Browning BK Sheaves permit the running of A, 4L, B and 5L Belts to be run in them, thus providing a variety of different pitch diameters and horsepowers
- Large Selection - MVP companion sheaves are offered in A/B, C, 5Vand 8V belt sections and from 3-10 grooves giving Browning the largest selection of MVP Companion Sheaves in the industry
- Statically Balanced - All MVP companion sheaves are statically balanced to assure smooth, vibration free performance
- VP sheaves consist of a male with a threaded barrel, and a female with a threaded bore
- The male section with threaded barrel has flat surfaces at 180 deg increments that allow a flat surface for the setscrew to mate with
- When discs are moved toward each other, the belt rides higher in the groove and the pitch diameter of the sheave is larger which increases the driven speed
-
Alternative Part NumberBK28X1/2
-
UNSPSC24101610
-
Package DescriptionEACH
-
Warranty1 Year
-
Catalog
Recently Viewed
Browning® Classical Gripbelt® 1027952 BK Series Type 2 Single Groove Sheave, Finished Bore, 1/2 in Dia Bore, 2.95 in OD, 2.4 in (A)/2.9 in (B) Dia Pitch, 13/16 in W Face
Gates® Power Transmission Super HC® PowerBand® 5/3V710 Heavy Duty Non-Notched Raw Edge V-Belt, 3V Section, 3/8 in W Top, 71 in L Outside, 21/64 in THK, Chloroprene
Combines the strength of a wrapped belt construction with the economies of a narrow section V-belt. Transmits more power in a given space and allows more compact drive design than classical section V-belts. In short, it offers you more power and considerably reduces the space needed. This significantly cuts the overall drive cost. Super HC™ V-belts also have exclusive Gates construction features for longer life on your drives.
SIZE-12 32" MARSH NON-INSULATED HIP BOOTS - LAC15604012>
SIZE-11 32" MARSH NON-INSULATED HIP BOOTS - LAC15604011>
The series CU reels are designed for lighter duty applications that require longer lengths of low pressure air/water hose. Hand crank with a balanced brass swivel and brass inlet series CU is the product of lighter weight components and forward thinking design. An economical choice for storing and retrieving hose.
Browning® Classical Gripbelt® 1028372 BK Series Type 3 Single Groove Sheave, Finished Bore, 1/2 in Dia Bore, 4-3/4 in OD, 4.2 in (A)/4.7 in (B) Dia Pitch, 7/8 in W Face
