Browning® 1061290 Type 5 Multiple Sheave, 3/4 to 2-11/16 in Split Taper Bore, 5.2 in OD, 2 Grooves, 5.1 in Dia Pitch, 1-11/16 in W Face
Browning® offers an extensive multi groove sheave offering. This includes Browning® SPLIT TAPER® and QD® bushing designs. This means maximum economy and versatility for your application. Truly the right drive every time! Our exclusive B5V® sheaves have a patented design that offers 5 V hp in the economy of a B section sheave. B5V® sheaves serve 90% of all applications from 10 to 150 hp. This can reduce cost up to 40% over traditional designs.
-
BrandBrowning®
-
UPC662289536245
-
Manufacturer Part Number1061290
-
CountryUSA
-
Face Width1-11/16 in
-
Bushing TypeQ1
-
Pitch Diameter5.1 in
-
MaterialCast Iron
-
TypeType 5
-
Hub Projection27/32 in
-
Number of Grooves2
-
Outside Diameter5.2 in
-
Bore Diameter3/4 to 2-11/16 in
-
Bore TypeSplit Taper
-
Overall Length2-49/64 in
-
Suitable For Use WithGripbelt® 5V Cross Section Belt
- Incorporates Browning® split taper bushing the only bushing system that provides a true key-to-key drive to both the shaft and the hub
- Sheaves are statically balanced to assure smooth, vibration free performance
- Close grain cast iron allows Browning® to machine our sheaves to the closest tolerances possible
- Constant Speed - No slip, no creep, minimum backlash due to the positive engagement of the belt teeth with the grooves of the sprockets
- Broad depth of product to choose from - Browning offers 5 different sprocket pitches along with a wide range of sprocket and belt widths to accommodate any horsepower requirement
- Different Mounting to the shaft - Browning offers the Gearbelt Pulleys in various ways to mount to the shaft, Split Taper and QD Bushing styles, as well as, finished and minimum plain bore
-
Alternative Part Number2Q5V52
-
UNSPSC24101610
-
Package DescriptionEACH
-
Warranty1 Year
-
Instruction/Installation Manual
Recently Viewed
Browning® 1061290 Type 5 Multiple Sheave, 3/4 to 2-11/16 in Split Taper Bore, 5.2 in OD, 2 Grooves, 5.1 in Dia Pitch, 1-11/16 in W Face
Browning® offers an extensive multi groove sheave offering. This includes Browning® SPLIT TAPER® and QD® bushing designs. This means maximum economy and versatility for your application. Truly the right drive every time! Our exclusive B5V® sheaves have a patented design that offers 5 V hp in the economy of a B section sheave. B5V® sheaves serve 90% of all applications from 10 to 150 hp. This can reduce cost up to 40% over traditional designs.
Proto® J222G Long Thin Needle Nose Plier, Diamond Serrated Steel Jaw, 2-1/8 in L x 11/16 in W Jaw, 6-11/16 in OAL, 11/32 in W Tip
Proto® J222G Long Thin Needle Nose Plier, Diamond Serrated Steel Jaw, 2-1/8 in L x 11/16 in W Jaw, 6-11/16 in OAL, 11/32 in W Tip
60-WATT FROST TUFF SKIN BULBS
Sealmaster® 701871 MP Series Medium Duty Pillow Block Ball Bearing Unit, 2 in Dia Bore, 5-15/16 to 7-9/16 in L Bolt Center-to-Center, 2-1/2 in Base to Bore Centerline, 9-1/2 in OAL x 5-3/32 in OAH
Sealmaster® gold mounted ball bearings feature a wide outer race insert bearing with land riding metallic retainer. The black oxide treated bearing steel insert features an exclusive lock pin and dimple system providing a direct path for lubrication into the bearing, and prevents outer ring rotation within the housing. Shaft lock is achieved by either setscrew or Skwezloc® concentric locking collar. The felt seal with flinger provide a good balance between contaminant entry, GoldPlex® HP grease loss and friction. Depending on your preference, these bearings are available in both inch and metric shaft sizes with a wide variety of cast iron, stamped steel or rubber mount housings, sealing, and lubrication options or industry specific solutions.
Chicago Pneumatic T023145 Ratchet Wrench, 1/4 in Drive, 21 N-m Torque, 200 rpm Speed, 11 cfm Air Flow
Chicago Pneumatic T023145 Ratchet Wrench, 1/4 in Drive, 21 N-m Torque, 200 rpm Speed, 11 cfm Air Flow
MasterDrive 3535-1.3/16 3535 3 Socket Tapered Bushing, 1.18 in Dia Bore, 4.83 in Dia Barrel, 5 in OAL, Cast Iron
TB (Taped Lock Style) Bushings are used on sheaves, sprockets and pulleys to provide increased clamping force over standard bore-to-size components. They are tapered in design without flanges and utilize screws to tighten on the shaft. Their compact design makes them convienent in many applications that are space-constrained. Each TB Bushing size is produced in a number of different finished bore options that include a keyway, as well as a minimum plain bore option. This allows users flexibility when using TB style sheaves, sprockets or pulleys in applications that may utilize various shaft sizes.
