Browning® 1060011 Type H-4 Multiple Sheave, 0.38 to 1.5 in Split Taper Bore, 4-1/2 in OD, 2 Grooves, 4.45 in Dia Pitch, 1-3/32 in W Face
Browning® offers an extensive multi-groove sheave offering. This includes Browning® Split-Taper® and QD® bushing designs. This means maximum economy and versatility for your application. Truly the right drive every time our exclusive B5V® sheaves have a patented design that offers 5V horsepower in the economy of a B section sheave. B5V® sheaves serve 90% of all applications from 10 to 150 hp. This can reduce cost up to 40% over traditional designs.
-
BrandBrowning®
-
UPC662289309405
-
Manufacturer Part Number1060011
-
CountryUSA
-
Face Width1-3/32 in
-
Bushing TypeH
-
Pitch Diameter4.45 in
-
MaterialCast Iron
-
TypeType H-4
-
Number of Grooves2
-
Outside Diameter4-1/2 in
-
Bore Diameter0.38 to 1.5 in
-
Bore TypeSplit Taper
-
Overall Length1-1/2 in
-
Suitable For Use WithGripBelt® 3V Cross Section V-Belt
- Incorporates Browning® Split-Taper® bushing the only bushing system that provides a true key-to-key drive to both the shaft and the hub
- Sheaves are Statically Balanced - All sheaves are statically balanced to assure smooth, vibration free performance
- Close Grain Cast iron - Close grain cast iron allows Browning to machine our sheaves to the closest tolerances possible
-
Alternative Part Number2H3V45
-
UNSPSC26111806
-
Package DescriptionEACH
-
Standards/ApprovalsABMA/AGMA/AIST/AWEA/CEMA/GEAPS/MPTA/NSSGA/PTDA Standards
-
Warranty1 Year
-
Warranty Information
-
Instruction/Installation Manual
Recently Viewed
Browning® 1060011 Type H-4 Multiple Sheave, 0.38 to 1.5 in Split Taper Bore, 4-1/2 in OD, 2 Grooves, 4.45 in Dia Pitch, 1-3/32 in W Face
Browning® offers an extensive multi-groove sheave offering. This includes Browning® Split-Taper® and QD® bushing designs. This means maximum economy and versatility for your application. Truly the right drive every time our exclusive B5V® sheaves have a patented design that offers 5V horsepower in the economy of a B section sheave. B5V® sheaves serve 90% of all applications from 10 to 150 hp. This can reduce cost up to 40% over traditional designs.
Sealmaster® 701879 MP Series Medium Duty Pillow Block Ball Bearing Unit, 2-11/16 in Dia Bore, 7-7/8 to 10-1/8 in L Bolt Center-to-Center, 3-1/2 in Base to Bore Centerline, 13 in OAL x 7 in OAH
Sealmaster® gold mounted ball bearings feature a wide outer race insert bearing with land riding metallic retainer. The black oxide treated bearing steel insert features an exclusive lock pin and dimple system providing a direct path for lubrication into the bearing, and prevents outer ring rotation within the housing. Shaft lock is achieved by either setscrew or Skwezloc® concentric locking collar. The felt seal with flinger provide a good balance between contaminant entry, GoldPlex® HP grease loss and friction. Depending on your preference, these bearings are available in both inch and metric shaft sizes with a wide variety of cast iron, stamped steel or rubber mount housings, sealing, and lubrication options or industry specific solutions.
Dodge® 131849 212 Normal Duty Pillow Block Ball Bearing Unit, 2-7/16 in Dia Bore, 6.88 to 7.94 in L Bolt Center-to-Center, 2.69 in Base to Bore Centerline, 9-1/2 in OAL x 5.34 in OAH
For more than 70 years, Dodge® has been talking to mounted bearing users and listening to their needs. This experience led to design of the optimum mounted ball bearings. The result is the Dodge® SXR line, the most current eccentric collar mounted ball bearing design on the market, provides the user unmatched quality and true total value.
FYH® NAPK201 8 NAPK Normal Duty Pillow Block Unit, 1/2 in Dia Bore, 3-27/32 in L Bolt Center-to-Center, 1-1/4 in Base to Bore Centerline, 5-1/4 in OAL 2-15/32 in OAH
FYH® NAPK201 8 NAPK Normal Duty Pillow Block Unit, 1/2 in Dia Bore, 3-27/32 in L Bolt Center-to-Center, 1-1/4 in Base to Bore Centerline, 5-1/4 in OAL 2-15/32 in OAH
Dodge® 126823 218 Medium Duty Pillow Block Ball Bearing Unit, 3-7/16 in Dia Bore, 10.32 to 11.62 in L Bolt Center-to-Center, 4 in Base to Bore Centerline, 14 in OAL x 8 in OAH
For over 70 years, Dodge® has been talking to mounted bearing users and listening to their needs. This experience lead to the design of the optimum mounted ball bearing. A state-of-the-art facility was built to manufacture the new Dodge® design. The result is the Dodge® SC/SCM/SL line. Its premium features make it the most reliable setscrew mounted ball bearing on the market and provides the user unmatched quality and true total value.
Browning® 1060276 Type H-4 Multiple Sheave, 0.38 to 1.5 in Split Taper Bore, 5.3 in OD, 2 Grooves, 5-1/4 in Dia Pitch, 1-3/32 in W Face
Browning® offers an extensive multi-groove sheave offering. This includes Browning® Split-Taper® and QD® bushing designs. This means maximum economy and versatility for your application. Truly the right drive every time our exclusive B5V® sheaves have a patented design that offers 5V horsepower in the economy of a B section sheave. B5V® sheaves serve 90% of all applications from 10 to 150 hp. This can reduce cost up to 40% over traditional designs.
