Dodge® 111099 Type A1 Sheave, 7/8 to 3-1/4 in Taper-Lock® Bore, 9-1/4 in OD, 3 Grooves, 9.15 in Dia Pitch, 2.37 in W Face
Sheaves are manufactured in Dodge® plants under strict quality control assurances. Precision machining meets or exceeds joint extended belt life. Dodge® manufactures all sheaves in plants certified to ISO 9002 quality standards.
-
BrandDodge®
-
UPC782475085767
-
Manufacturer Part Number111099
-
CountryUSA
-
Face Width2.37 in
-
Bushing Type3020
-
Pitch Diameter9.15 in
-
FinishGray
-
MaterialCast Iron
-
TypeType A1
-
Number of Grooves3
-
Outside Diameter9-1/4 in
-
Bore Diameter7/8 to 3-1/4 in
-
Bore TypeTaper-Lock®
-
Suitable For Use With5V-Cross Section V-Belts
- Isolates shock loads and vibration
- Minor misalignment capability
- Drive ratios of 6:1 or more possible
- Low maintenance
- No lubrication required
- Typically 95% efficiency can be obtained
-
Alternative Part Number3-5V9.25-3020
-
UNSPSC31171804
-
Package DescriptionEACH
-
Instruction/Installation Manual
-
Catalog
-
Line Drawing
-
Specification Sheet
Recently Viewed
Dodge® 111099 Type A1 Sheave, 7/8 to 3-1/4 in Taper-Lock® Bore, 9-1/4 in OD, 3 Grooves, 9.15 in Dia Pitch, 2.37 in W Face
Sheaves are manufactured in Dodge® plants under strict quality control assurances. Precision machining meets or exceeds joint extended belt life. Dodge® manufactures all sheaves in plants certified to ISO 9002 quality standards.
The Power-Stud®+ SD1 anchor is a fully threaded, torque controlled, wedge expansion anchor which is designed for consistent performance in cracked and un-cracked concrete. Suitable base materials include normal weight concrete, sand lightweight concrete, concrete over steel deck and grouted concrete masonry. The anchor is manufactured with a zinc plated carbon steel body and expansion clip for premium performance.
Browning® 1033034 BK Series Type 1 FHP Sheave, 3/4 in Finished Bore, 2-1/2 in OD, 2 Grooves, 2 in (A)/2-1/2 in (B) Dia Pitch, 1-3/4 in W Face
Browning® offers an extensive multi groove sheave offering. This includes Browning® SPLIT TAPER® and QD® bushing designs. This means maximum economy and versatility for your application. Truly the right drive every time! Our exclusive B5V® sheaves have a patented design that offers 5 V hp in the economy of a B section sheave. B5V® sheaves serve 90% of all applications from 10 to 150 hp. This can reduce cost up to 40% over traditional designs.
Weiler® 21077 Round Wire Power Tube Brush, 7/8 in Dia x 1 in L, 3-1/2 in OAL, 0.006 in Dia Filament/Wire, Steel Fill
Weiler® 21077 Round Wire Power Tube Brush, 7/8 in Dia x 1 in L, 3-1/2 in OAL, 0.006 in Dia Filament/Wire, Steel Fill
Martin Hi-Cap® 5 5V 750 TB Solid Type A-1 Wedge Stock Sheave, 15/16 to 2-3/4 in TB Bushed Bore, 7-1/2 in OD, 5 Grooves, 7.4 in Dia Pitch, 3-3/4 in W Face
Hi-Cap® sheaves (narrow V-belts) are manufactured from class 30 gray iron (30000 tensile strength) and can have a maximum speed of 6500 fpm. All Martin sheaves are statically balanced. Dynamic balancing should be considered for any sheaves exceeding 5000 fpm or if they will be used on equipment where vibration is a problem. Martin has extensive inventories of both QD and TB style V-belt sheaves to run with 3V, 5V and 8V belts.
Dodge® 112042 Type C3 Sheave, 7/8 to 3-1/4 in Taper-Lock® Bore, 19 in OD, 3 Grooves, 18.95 in Dia Pitch, 1-1/2 in W Face
Sheaves are manufactured in Dodge® plants under strict quality control assurances. Precision machining meets or exceeds joint extended belt life. Dodge® manufactures all sheaves in plants certified to ISO 9002 quality standards.
