HTD Pulleys
14MX-67S-68-3525 Dodge® 482117 HT500 Type A2F High Torque Belt Sprocket, 1-3/16 to 3-15/16 in Taper-Lock® Bore, 11.645 in OD, 67 Grooves, 11.755 in Dia Pitch, 3.33 in W Face
The Dodge® high torque HT500 synchronous drive product line utilizes a modified curvilinear tooth profile to delivers high torque, low maintenance and high energy efficiency with less overhung load than V-belt drives. The HT500 product family features a complete offering of synchronous sprockets with shaft attachment options including taper-lock and QD bushings (fin fan), as well as minimum plain bore sprockets (MPB) and idler sprockets available from stock.
P28-14M-55-2012 Dodge® 112922 HT250 Type A1F High Torque Belt Sprocket, 1/2 to 2-1/8 in Taper-Lock® Bore, 4.802 in OD, 28 Grooves, 4.912 in Dia Pitch, 2-3/4 in W Face
P28-14M-55-2012 Dodge® 112922 HT250 Type A1F High Torque Belt Sprocket, 1/2 to 2-1/8 in Taper-Lock® Bore, 4.802 in OD, 28 Grooves, 4.912 in Dia Pitch, 2-3/4 in W Face
P30-8M-30-1210 Dodge® 112871 HT250 Type A1F High Torque Belt Sprocket, 1/2 to 1-1/4 in Taper-Lock® Bore, 2.954 in OD, 30 Grooves, 3.008 in Dia Pitch, 1-1/2 in W Face
P30-8M-30-1210 Dodge® 112871 HT250 Type A1F High Torque Belt Sprocket, 1/2 to 1-1/4 in Taper-Lock® Bore, 2.954 in OD, 30 Grooves, 3.008 in Dia Pitch, 1-1/2 in W Face
P40-8M-30-2012 Dodge® 112876 HT250 Type A1F High Torque Belt Sprocket, 1/2 to 2-1/8 in Taper-Lock® Bore, 3.956 in OD, 40 Grooves, 4.01 in Dia Pitch, 1-1/2 in W Face
P40-8M-30-2012 Dodge® 112876 HT250 Type A1F High Torque Belt Sprocket, 1/2 to 2-1/8 in Taper-Lock® Bore, 3.956 in OD, 40 Grooves, 4.01 in Dia Pitch, 1-1/2 in W Face
P72-8M-30-2517 Dodge® 112881 HT250 Type B1F High Torque Belt Sprocket, 1/2 to 2-11/16 in Taper-Lock® Bore, 7.164 in OD, 72 Grooves, 7.218 in Dia Pitch, 1-1/2 in W Face
P72-8M-30-2517 Dodge® 112881 HT250 Type B1F High Torque Belt Sprocket, 1/2 to 2-11/16 in Taper-Lock® Bore, 7.164 in OD, 72 Grooves, 7.218 in Dia Pitch, 1-1/2 in W Face
Recently Viewed
Q-20-T-3/CL 20-watt Quartz Halogen Bulb
20-WATT QUARTZ HALOGEN BULBS-BULQ20T3/CL>
14" 120# NATURAL CABLE TIE--PACK OF 100-CTE14120N100 >
T-12" 15" X 14" 14" WATT FLUORESCENT BULBS-BULF14T12CW >
Packard PTMJ161R Capacitor, 161 to 193 mfd, 220 to 250 V
Browning® 3779949 VP Series Type 2 Variable Pitch Sheave, 1-3/8 in Finished Bore, 6.55 in OD, 1 Groove, 4.9 to 5.9 in (A/4L)/5.2 to 6.4 in (B/5L/5V) Dia Pitch, 7/8 to 1-1/4 in W Face
The principle of a variable pitch sheave is that the threaded angular faced discs forming the V-shaped groove in which the belt rides are movable. VP sheaves consist of a male with a threaded barrel, and a female with a threaded bore. The male section with threaded barrel has flat surfaces at 180 deg increments that allow a flat surface for the setscrew to mate with. When the discs are moved toward each other, the belt rides higher in the groove and the pitch diameter of the sheave is larger which increases the driven speed. When the discs are moved away from each other, the belt rides lower and the pitch diameter is smaller decreasing the driven speed. The common term for this speed adjustment is called number of turns open from closed position.
Five ratcheting box wrenches packed in a vinyl 8-1/2-Inch x 10-Inch (21.6 x 25.4 cm) H roll-up pouch with individual pockets
Wrenches flip over to reverse ratchet
Set includes five double-hex wrenches with a different size at each end
Both ends are offset 25-degree for more convenient use in confined spaces and on long studs
Made in USA
Laminated construction for greater strength
Reverse ratcheting action by simply turning wrench over
Chrome-plated finish for rust resistance
