P28-14M-55-2012 Dodge® 112922 HT250 Type A1F High Torque Belt Sprocket, 1/2 to 2-1/8 in Taper-Lock® Bore, 4.802 in OD, 28 Grooves, 4.912 in Dia Pitch, 2-3/4 in W Face
P28-14M-55-2012 Dodge® 112922 HT250 Type A1F High Torque Belt Sprocket, 1/2 to 2-1/8 in Taper-Lock® Bore, 4.802 in OD, 28 Grooves, 4.912 in Dia Pitch, 2-3/4 in W Face
-
BrandDodge®
-
UPC782475676248
-
Manufacturer Part Number112922
-
CountryUSA
-
Face Width2-3/4 in
-
Bushing Type2012
-
Pitch14 mm
-
Pitch Diameter4.912 in
-
Flange Diameter5.56 in
-
TypeType A1F
-
SeriesHT250
-
Number of Grooves28
-
Outside Diameter4.802 in
-
Bore Diameter1/2 to 2-1/8 in
-
Bore TypeTaper-Lock®
- Positive and non-slip drive
- No lubrication required
- Non-stretch
- Corrosion resistant
- Abrasion resistant
- Virtually no backlash
- Long life
- Low maintenance
-
Alternative Part NumberP28-14M-55-2012
-
UNSPSC26111807
-
Specification Sheet
-
Catalog
-
Instruction/Installation Manual
Recently Viewed
P28-14M-55-2012 Dodge® 112922 HT250 Type A1F High Torque Belt Sprocket, 1/2 to 2-1/8 in Taper-Lock® Bore, 4.802 in OD, 28 Grooves, 4.912 in Dia Pitch, 2-3/4 in W Face
P28-14M-55-2012 Dodge® 112922 HT250 Type A1F High Torque Belt Sprocket, 1/2 to 2-1/8 in Taper-Lock® Bore, 4.802 in OD, 28 Grooves, 4.912 in Dia Pitch, 2-3/4 in W Face
Steel shim is made from a full hard, cold rolled, low carbon 1008-1010 steel. Precision Brand® is the only manufacturer to offer Branded® shim. It has everything the user needs to know clearly marked right on the shim: material type, material thickness and lot # for full traceability. Used in applications where hardness, flatness and accuracy are required. Material can be punched or sheared with minimum burring and distortion. Precision Brand® shim stock is widely used in the following applications: tool and die set up, alignment, new machine assembly, machine repair and maintenance; mounting of motors, pumps and other machines, short run and prototype work, along with a variety of other industrial uses. It is especially useful for pilot production runs where material accuracy and economy are important. All Precision Brand® shim products are manufactured under rigorous quality control standards to assure high accuracy and tight tolerances.
Smith Bearing® SMITH XTREME™ NUKR-35 Crowned Double Row Heavy Duty Roller Stud Type Needle Bearing Cam Follower, 35 mm Dia x 18 mm W Roller, 16 mm Dia x 32.5 mm L Stud, 52100 Steel Roller
Made with a double row of heavy rollers for extremely high load applications. These heavy duty bearings are assembled with metallic side shields helping to retain grease and keep out containments.
Lincoln® 5300 Standard Grease Fitting, 1/8 in Thread, 7/8 in OAL, Zinc Yellow Plated, Carbon Steel
Lincoln® 5300 Standard Grease Fitting, 1/8 in Thread, 7/8 in OAL, Zinc Yellow Plated, Carbon Steel
12THHN PURPLE ELECTRICAL WIRE (FT)-ALE12THHNPUR >
16-1 2" X 21.88 FILTER F ACME ECH42-AAF992115 >
