Gates® Power Transmission Metric-Power™ XPZ1077 Heavy Duty Molded Notch V-Belt, XPZ Section, 10 mm W Top, 1081 mm L Outside, 8 mm THK, EPDM
Manufactured to our exacting standards for quality, safety, and dependability. Their proprietary construction ensures unmatched load-carrying capacity paired with superior flex and stretch resistance.
-
BrandGates® Power Transmission
-
UPC072053691757
-
Manufacturer Part NumberXPZ1077
-
CountryUSA|Canada
-
Temperature Range-70 to 250 deg F
-
Thickness8 mm
-
MaterialEPDM
-
Top Width10 mm
-
Reinforced MaterialFlex-Bonded Polyester
-
TypeHeavy Duty Molded Notch
-
Section SizeXPZ
-
Series9426
-
Number of Ribs1
-
Outside Length1081 mm
- Flex-bonded cords are chemically bonded to the body of the belt resulting in equal load distribution and the absorption of bending stress without cord deterioration
- Proprietary construction features an unbeatable combination of flex and load carrying capacity, reduced stretch and incredible cord adhesion properties
- Patented ethylene material construction provides -70 to 250 deg F temperature range to resist belt cracking
- Molded notches reduce thermal and bending stresses
-
Alternative Part Number942611077
-
UNSPSC26111801
-
Package DescriptionEACH
-
Standards/ApprovalsARPM/RMA IP-3-2/IP-3-3
-
Instruction/Installation Manual
-
Catalog
Recently Viewed
Gates® Power Transmission Metric-Power™ XPZ1077 Heavy Duty Molded Notch V-Belt, XPZ Section, 10 mm W Top, 1081 mm L Outside, 8 mm THK, EPDM
Manufactured to our exacting standards for quality, safety, and dependability. Their proprietary construction ensures unmatched load-carrying capacity paired with superior flex and stretch resistance.
Gates® Power Transmission Tri-Power® PowerBand® 4/BX112 Heavy Duty Molded Notch V-Belt, BX Section, 21/32 in W Top, 115.6 in L Outside, 13/32 in THK, EPDM
Built for superior performance on heavy duty classical cross-section drives. The raw edge, Ethylene Elastomer construction and special notch design makes the Tri-Power belt especially suited for small diameter pulleys and back side idler drives.
40W HI-INTENSITY BULB--CARDED-JWH514896 >
OIL SEALS-3.375" X 4.626" X .438"-CHI33773>
QUART OF CARPET DEFOAMER-JWH616523 >
MasterDrive Q2-2.1/8 Q2 Series Double Split Tapered Bushing, 2.12 in Dia Bore, 2-7/8 in Dia Barrel, 4-1/8 in Dia Flange, 3-1/2 in OAL, Ductile Iron
Double Split Tapered Bushings are used on sheaves, sprockets and pulleys to provide increased clamping force over standard bore-to-size components. They are tapered in design with flanges and utilize cap screws to tighten on the shaft. The double split design assures better concentricity to the shaft and provides the highest degree of mechanical locking component to component. Most sizes are contructed of ductile iron to provide strength and duarability. Each Split Taper Bushing series is produced in a number of different bore size options, most that include a keyway, allowing users flexibility when using sheaves, sprockets or pulleys in applications that may utilize various shaft sizes.
