Gates 8-V-2800 Industrial V-Belts - 8V Section, 1 in Top Width, 1 Strand, 280.0000 in Nominal Outside Length, Smooth
Combines the strength of a wrapped belt construction with the economies of a narrow section V-belt. Transmits more power in a given space and allows more compact drive design than classical section V-belts. In short, it offers you more power and considerably reduces the space needed. This significantly cuts the overall drive cost. Super HC™ V-belts also have exclusive Gates construction features for longer life on your drives.
-
BrandGates® Power Transmission
-
UPC72053016710
-
Manufacturer Part Number8V2800
-
CountryUSA|Canada
-
Temperature Range-30 to 180 deg F
-
Thickness7/8 in
-
MaterialChloroprene
-
Top Width1 in
-
Reinforced MaterialFlex-Bonded Polyester
-
ColorBlack
-
TypeBanded Heavy Duty
-
Minimum Pulley Diameter15.916 in
-
Section Size8V
-
Number of Ribs1
-
Outside Length280 in
-
Series9336
- Flex-bonded cords are strongly bonded to the body of the belt resulting in equal load distribution and the absorption of bending stress without cord deterioration
- The Flex-Weave® cover is constructed for longer cover life, providing extended protection to the core of the belt from oil, dirt and heat
- Gates® curves provide proper cord support and full contact with the sheave groove for uniform loading, uniform wear and increased belt life
-
UNSPSC26111801
-
Standards/ApprovalsARPM/RMA IP-3-2/IP-3-3
-
Alternative Part Number93362800
-
Package DescriptionEACH
-
Catalog
-
Instruction/Installation Manual
-
Specification Sheet
Recently Viewed
Gates 8-V-2800 Industrial V-Belts - 8V Section, 1 in Top Width, 1 Strand, 280.0000 in Nominal Outside Length, Smooth
Combines the strength of a wrapped belt construction with the economies of a narrow section V-belt. Transmits more power in a given space and allows more compact drive design than classical section V-belts. In short, it offers you more power and considerably reduces the space needed. This significantly cuts the overall drive cost. Super HC™ V-belts also have exclusive Gates construction features for longer life on your drives.
Gates® Power Transmission Super HC® 3V500 Banded Heavy Duty V-Belt, 3V Section, 3/8 in W Top, 50 in L Outside, 21/64 in THK, Chloroprene
Combines the strength of a wrapped belt construction with the economies of a narrow section V-belt. Transmits more power in a given space and allows more compact drive design than classical section V-belts. In short, it offers you more power and considerably reduces the space needed. This significantly cuts the overall drive cost. Super HC™ V-belts also have exclusive Gates construction features for longer life on your drives.
The Original Muck Boot Company CHS-META-BLK-080 Chore CHS-META Work Boots, Men's, SZ 8, 16 in H, Steel Toe, Rubber/5 mm CR Flex Foam Upper, Resists: Abrasion, Chemical, Impact, Slip and Splash, ASTM F2413-11 M I/75 C/75 MT/75 EH
The Original Muck Boot Company CHS-META-BLK-080 Chore CHS-META Work Boots, Men's, SZ 8, 16 in H, Steel Toe, Rubber/5 mm CR Flex Foam Upper, Resists: Abrasion, Chemical, Impact, Slip and Splash, ASTM F2413-11 M I/75 C/75 MT/75 EH
Gates® Power Transmission Super HC® Molded Notch PowerBand® 5/5VX1800 Heavy Duty Molded Notch V-Belt, 5VX Section, 5/8 in W Top, 180 in L Outside, 35/64 in THK, EPDM
When your power transmission application needs a high horsepower solution but is constrained by drive weight or physical space, the answer is Super HC™ Molded Notch belts. Our proprietary ethylene construction process provides a superior combination of flex and load-carrying capacity, transmitting up to three times the horsepower versus comparably sized belts. Super HC MN V-belts put more power where high speeds, high speed ratios or small pulley diameters are required, offering significant benefits over classical section V-belts.
Appleton® UNILETS™ LR17 Type LR Conduit Outlet Body, 1/2 in Hub, Form 7 Form, 4 cu-in Capacity, Grayloy Iron, Triple Coated
Appleton® FM7™ Conduit Outlet Bodies are used to connect and change direction of conduit runs. In addition to making bends in a conduit system, they allow connections for branch runs. These conduit bodies serve as pulling fittings and permit access to conductors for splicing and maintece.
Gates® MegaCrimp™ couplings are designed for use with Gates® wire braid hydraulic hoses to create a robust, leak-free assembly. The pre-assembled coupling is designed with a patented "C" insert attached to the ferrule. This design ensures that crimping forces are evenly distributed to form a concentric, leak-free seal. One MegaCrimp™ coupling size can accommodate various one-and two-wire braid hydraulic hoses of different constructions and wall thicknesses, simplifying inventory requirements, helping to reduce costs and simplifying coupling selection.
