Gates 5-GROOVE BANDED 5-V-1600 V-BELTS GAT 5/5-V-1600
Combines the strength of a wrapped belt construction with the economies of a narrow section V-belt. Transmits more power in a given space and allows more compact drive design than classical section V-belts. In short, it offers you more power and considerably reduces the space needed. This significantly cuts the overall drive cost. Super HC™ V-belts also have exclusive Gates construction features for longer life on your drives.
-
BrandGates® Power Transmission
-
UPC72053288391
-
Manufacturer Part Number5/5V1600
-
CountryUSA|Canada
-
Temperature Range-30 to 180 deg F
-
Thickness35/64 in
-
MaterialChloroprene
-
Top Width5/8 in
-
Reinforced MaterialFlex-Bonded Polyester
-
TypeBanded Heavy Duty
-
Minimum Pulley Diameter7.958 in
-
Section Size5V
-
Series9386
-
Number of Ribs5
-
Outside Length160 in
- Flex-bonded cords are strongly bonded to the body of the belt resulting in equal load distribution and the absorption of bending stress without cord deterioration
- The tie band assures high lateral rigidity, guiding the belt in a straight line and preventing it from coming off the drive
- Concave sidewalls provide proper cord support and full contact with the sheave groove for equal loading and uniform wear
-
Alternative Part Number93865160
-
UNSPSC26111801
-
Package DescriptionEACH
-
Standards/ApprovalsARPM/RMA IP-3-2/IP-3-3
-
Instruction/Installation Manual
-
Specification Sheet
-
Catalog
Recently Viewed
Combines the strength of a wrapped belt construction with the economies of a narrow section V-belt. Transmits more power in a given space and allows more compact drive design than classical section V-belts. In short, it offers you more power and considerably reduces the space needed. This significantly cuts the overall drive cost. Super HC™ V-belts also have exclusive Gates construction features for longer life on your drives.
RAK-2-15/16 heavy-duty, 2-bolt pillow block ball bearing unit featuring a 2-15/16 inch bore diameter.
• Bore Diameter: 2-15/16 inches (74.613 mm / 74.625 mm)
• Housing Style: 2-Bolt Pillow Block (Cast Iron)
• Locking Style: Eccentric Locking Collar
• Bearing Insert: G1215KRRB (Wide inner ring, heavy-duty ball bearing)
• Expansion Type: Non-expansion / Fixed unit
• Load Capacities: 15,500 lbf Dynamic / 10,100 lbf Static
PREMIUM PVC AIR HOSES FEATURE AN OIL-RESISTANT TUBE AND COVER, FLEXIBLE KINK PROOF CONSTRUCTION AND A GOOD TEMPERATURE. BEND RESTRICTORS EXTEND SERVICE LIFE
-JAS3/8X50 >
Sealmaster® gold mounted ball bearings feature a wide outer race insert bearing with land riding metallic retainer. The black oxide treated bearing steel insert features an exclusive lock pin and dimple system providing a direct path for lubrication into the bearing and prevents outer ring rotation within the housing. Shaft lock is achieved by either setscrew or Skwezloc® concentric locking collar. The felt seal with flinger provide a good balance between contaminant entry, GoldPlex® HP grease loss and friction.
