Gates® Power Transmission Super HC® Molded Notch PowerBand® 5/3VX450 Heavy Duty Molded Notch V-Belt, 3VX Section, 3/8 in W Top, 45 in L Outside, 21/64 in THK, EPDM
When your power transmission application needs a high horsepower solution but is constrained by drive weight or physical space, the answer is Super HC™ Molded Notch belts. Our proprietary ethylene construction process provides a superior combination of flex and load-carrying capacity, transmitting up to three times the horsepower versus comparably sized belts. Super HC MN V-belts put more power where high speeds, high speed ratios or small pulley diameters are required, offering significant benefits over classical section V-belts.
-
BrandGates® Power Transmission
-
UPC72053287233
-
Manufacturer Part Number5/3VX450
-
CountryUSA|Canada
-
Temperature Range-60 to 250 deg F
-
Thickness21/64 in
-
MaterialEPDM
-
Top Width3/8 in
-
Reinforced MaterialFlex-Bonded Polyester
-
TypeHeavy Duty Molded Notch
-
Minimum Pulley Diameter3.82 in
-
Section Size3VX
-
Series9388
-
Number of Ribs5
-
Outside Length45 in
- Flex-bonded cords are strongly bonded to the body of the belt resulting in equal load distribution and the absorption of bending stress without cord deterioration
- Notches molded into the belt during manufacturing increase flexibility making this belt well suited for drives with smaller diameter sheaves
- The tie band assures high lateral rigidity, guiding the belt in a straight line and preventing it from coming off the drive
- Patented ethylene material construction provides -60 to 250 deg F temperature range to resist belt cracking
-
Alternative Part Number93885045
-
UNSPSC26111801
-
Package DescriptionEACH
-
Standards/ApprovalsARPM/RMA IP-3-2/IP-3-3
-
Catalog
-
Instruction/Installation Manual
-
Specification Sheet
Recently Viewed
Gates® Power Transmission Super HC® Molded Notch PowerBand® 5/3VX450 Heavy Duty Molded Notch V-Belt, 3VX Section, 3/8 in W Top, 45 in L Outside, 21/64 in THK, EPDM
When your power transmission application needs a high horsepower solution but is constrained by drive weight or physical space, the answer is Super HC™ Molded Notch belts. Our proprietary ethylene construction process provides a superior combination of flex and load-carrying capacity, transmitting up to three times the horsepower versus comparably sized belts. Super HC MN V-belts put more power where high speeds, high speed ratios or small pulley diameters are required, offering significant benefits over classical section V-belts.
BANJO SCHEDULE 80 HOSE BARB FITTINGS ARE USED IN MANY AGRICULTURAL & INDUSTRIAL FLOW APPLICATIONS. BANJO SCHEDULE 80 HOSE BARB FITTINGS ARE AVAILABLE IN SEVERAL SIZES & CONFIGURATIONS. MADE OF POLYPROPYLENE GLASS REINFORCED. PRESSURE RATING 150 PSI @ 70 DEGREE F.
-BAJHBF075 >
3/8" -HOSEX#6 FLAT FACE 90 LONG-MHDE0606FF90L >
The DeWALT® 24 TPI portable band saw blade (3-pack) is built to last, with a number of exclusive technologies designed to give you confidence that the blade will resist wear throughout its lifespan. An 8% cobalt content and ROC 65 to 67 tooth hardness maximize durability. With an alloy steel backer and matrix ii high speed steel edge, users never need to worry about heat and fatigue. DeWALT® understands that you cant afford to invest in an inferior product. All DeWALT® products are extensively tested to ensure that they wont let you down on your real world jobsites.
45-DEGREE SPRAY NOZZLE - VALPK85241045>
Southwire® Ultratite® 55094401 Type NM Liquid Tight Flexible Non-Metallic Conduit, 1 in Trade, 1.041 to 1.066 in ID x 1.303 in OD, 100 ft Coil L, PVC
The Southwire Company LiquidTite 1 in. x 100 ft. Non-Metallic Conduit is a flexible housing for electrical wire the provides impact protection in encased concrete or direct burial installations. This conduit is UL listed, CSA certified, green Spec and RoHS compliant. It helps protects electrical cables in burial and concrete applications.
