Gates® Power Transmission Super HC® Molded Notch PowerBand® 3/3VX900 Heavy Duty Molded Notch V-Belt, 3VX Section, 3/8 in W Top, 90 in L Outside, 21/64 in THK, EPDM
When your power transmission application needs a high horsepower solution but is constrained by drive weight or physical space, the answer is Super HC™ Molded Notch belts. Our proprietary ethylene construction process provides a superior combination of flex and load-carrying capacity, transmitting up to three times the horsepower versus comparably sized belts. Super HC MN V-belts put more power where high speeds, high speed ratios or small pulley diameters are required, offering significant benefits over classical section V-belts.
-
BrandGates® Power Transmission
-
UPC072053261141
-
Manufacturer Part Number3/3VX900
-
CountryUSA|Canada
-
Temperature Range-60 to 250 deg F
-
Thickness21/64 in
-
MaterialEPDM
-
Top Width3/8 in
-
Reinforced MaterialFlex-Bonded Polyester
-
TypeHeavy Duty Molded Notch
-
Minimum Pulley Diameter3.82 in
-
Section Size3VX
-
Series9388
-
Number of Ribs3
-
Outside Length90 in
- Flex-bonded cords are strongly bonded to the body of the belt resulting in equal load distribution and the absorption of bending stress without cord deterioration
- Notches molded into the belt during manufacturing increase flexibility making this belt well suited for drives with smaller diameter sheaves
- The tie band assures high lateral rigidity, guiding the belt in a straight line and preventing it from coming off the drive
- Patented ethylene material construction provides -60 to 250 deg F temperature range to resist belt cracking
-
Alternative Part Number93883090
-
UNSPSC26111801
-
Package DescriptionEACH
-
Standards/ApprovalsARPM/RMA IP-3-2/IP-3-3
-
Instruction/Installation Manual
-
Catalog
-
Specification Sheet
Recently Viewed
Gates® Power Transmission Super HC® Molded Notch PowerBand® 3/3VX900 Heavy Duty Molded Notch V-Belt, 3VX Section, 3/8 in W Top, 90 in L Outside, 21/64 in THK, EPDM
When your power transmission application needs a high horsepower solution but is constrained by drive weight or physical space, the answer is Super HC™ Molded Notch belts. Our proprietary ethylene construction process provides a superior combination of flex and load-carrying capacity, transmitting up to three times the horsepower versus comparably sized belts. Super HC MN V-belts put more power where high speeds, high speed ratios or small pulley diameters are required, offering significant benefits over classical section V-belts.
Sealmaster® 701237 FB Series Non-Expansion Round Straight Standard-Duty Flange Mount Ball Bearing Unit, 1 in Dia Bore, 2-1/2 in L Bolt Center-to-Center, 3-Bolt Flange Mount, 1-5/8 in OAL/Dia
Sealmaster® gold mounted ball bearings feature a wide outer race insert bearing with land riding metallic retainer. The black oxide treated bearing steel insert features an exclusive lock pin and dimple system providing a direct path for lubrication into the bearing and prevents outer ring rotation within the housing. Shaft lock is achieved by either setscrew or Skwezloc® concentric locking collar. The felt seal with flinger provide a good balance between contaminant entry, GoldPlex® HP grease loss and friction.
Gates® Power Transmission Super HC® Molded Notch PowerBand® 3/5VX670 Heavy Duty Molded Notch V-Belt, 5VX Section, 5/8 in W Top, 67 in L Outside, 35/64 in THK, EPDM
When your power transmission application needs a high horsepower solution but is constrained by drive weight or physical space, the answer is Super HC™ Molded Notch belts. Our proprietary ethylene construction process provides a superior combination of flex and load-carrying capacity, transmitting up to three times the horsepower versus comparably sized belts. Super HC MN V-belts put more power where high speeds, high speed ratios or small pulley diameters are required, offering significant benefits over classical section V-belts.
Gates® Power Transmission PowerGrip® HTD® P50-5M-15AL Sprocket, 3/8 to 1-3/16 in Rough Stock Bore, 3.088 in OD, 50 Grooves, 3.133 in Dia Pitch, 0.781 in W Face
PowerGrip Sprockets and Pulleys provide optimum performance for all constructions of PowerGrip GT, PowerGrip HTD and PowerGrip Timing belts, delivering maximum performance and superior reliability. PowerGrip sprockets are precision manufactured and static balanced to eliminate sprocket wobble.
Gates® Power Transmission Metric-Power™ XPB2240 Heavy Duty Molded Notch V-Belt, XPB Section, 17 mm W Top, 2252 mm L Outside, 13 mm THK, EPDM
Manufactured to our exacting standards for quality, safety, and dependability. Their proprietary construction ensures unmatched load-carrying capacity paired with superior flex and stretch resistance.
300-W 300-M BULB-JWH504582>
