Gates 4-GROOVE BANDED 3-VX-500 V-BELTS GAT 4/3-VX-500
When your power transmission application needs a high horsepower solution but is constrained by drive weight or physical space, the answer is Super HCā¢ Molded Notch belts. Our proprietary ethylene construction process provides a superior combination of flex and load-carrying capacity, transmitting up to three times the horsepower versus comparably sized belts. Super HC MN V-belts put more power where high speeds, high speed ratios or small pulley diameters are required, offering significant benefits over classical section V-belts.
-
BrandGatesĀ® Power Transmission
-
UPC72053277258
-
Manufacturer Part Number4/3VX500
-
CountryUSA|Canada
-
Temperature Range-60 to 250 deg F
-
Thickness21/64 in
-
MaterialEPDM
-
Top Width3/8 in
-
Reinforced MaterialFlex-Bonded Polyester
-
TypeHeavy Duty Molded Notch
-
Minimum Pulley Diameter3.82 in
-
Section Size3VX
-
Series9388
-
Number of Ribs4
-
Outside Length50 in
- Flex-bonded cords are strongly bonded to the body of the belt resulting in equal load distribution and the absorption of bending stress without cord deterioration
- Notches molded into the belt during manufacturing increase flexibility making this belt well suited for drives with smaller diameter sheaves
- The tie band assures high lateral rigidity, guiding the belt in a straight line and preventing it from coming off the drive
- Patented ethylene material construction provides -60 to 250 deg F temperature range to resist belt cracking
-
Alternative Part Number93884050
-
UNSPSC26111801
-
Package DescriptionEACH
-
Standards/ApprovalsARPM/RMA IP-3-2/IP-3-3
-
Instruction/Installation Manual
-
Specification Sheet
-
Catalog
Recently Viewed
When your power transmission application needs a high horsepower solution but is constrained by drive weight or physical space, the answer is Super HCā¢ Molded Notch belts. Our proprietary ethylene construction process provides a superior combination of flex and load-carrying capacity, transmitting up to three times the horsepower versus comparably sized belts. Super HC MN V-belts put more power where high speeds, high speed ratios or small pulley diameters are required, offering significant benefits over classical section V-belts.
GatesĀ® Power Transmission Super HCĀ® 3V475 Banded Heavy Duty V-Belt, 3V Section, 3/8 in W Top, 47-1/2 in L Outside, 21/64 in THK, Chloroprene
Combines the strength of a wrapped belt construction with the economies of a narrow section V-belt. Transmits more power in a given space and allows more compact drive design than classical section V-belts. In short, it offers you more power and considerably reduces the space needed. This significantly cuts the overall drive cost. Super HCā¢ V-belts also have exclusive Gates construction features for longer life on your drives.
4.438" X 5.501" X .500" OIL SEAL-CHI44275 >
GatesĀ® MegaCrimpā¢ couplings are designed for use with GatesĀ® wire braid hydraulic hoses to create a robust, leak-free assembly. The pre-assembled coupling is designed with a patented "C" insert attached to the ferrule. This design ensures that crimping forces are evenly distributed to form a concentric, leak-free seal. One MegaCrimpā¢ coupling size can accommodate various one-and two-wire braid hydraulic hoses of different constructions and wall thicknesses, simplifying inventory requirements, helping to reduce costs and simplifying coupling selection.
GatesĀ® Power Transmission Power CurveĀ® B158PC Heavy Duty V-Belt, B Section, 21/32 in W Top, 161 in L Outside, 13/32 in THK, EPDM
The conveyor turn is a demanding application in which V-belts face varying degrees of transverse bending. The Gates Power Curveā¢ belt was specifically engineered to handle the bending and twisting of this demanding application.
1:1 RATIO PUMP-GRC237134 >
