Gates® Power Transmission Super HC® 3V750 Banded Heavy Duty V-Belt, 3V Section, 3/8 in W Top, 75 in L Outside, 21/64 in THK, Chloroprene
Combines the strength of a wrapped belt construction with the economies of a narrow section V-belt. Transmits more power in a given space and allows more compact drive design than classical section V-belts. In short, it offers you more power and considerably reduces the space needed. This significantly cuts the overall drive cost. Super HC™ V-belts also have exclusive Gates construction features for longer life on your drives.
-
BrandGates® Power Transmission
-
UPC72053267662
-
Manufacturer Part Number3V750
-
CountryUSA|Canada
-
Temperature Range-30 to 180 deg F
-
Thickness21/64 in
-
MaterialChloroprene
-
Top Width3/8 in
-
Reinforced MaterialFlex-Bonded Polyester
-
TypeBanded Heavy Duty
-
Minimum Pulley Diameter3.82 in
-
Section Size3V
-
Series9332
-
Number of Ribs1
-
Outside Length75 in
- Flex-bonded cords are strongly bonded to the body of the belt resulting in equal load distribution and the absorption of bending stress without cord deterioration
- The Flex-Weave® cover is constructed for longer cover life, providing extended protection to the core of the belt from oil, dirt and heat
- Gates® curves provide proper cord support and full contact with the sheave groove for uniform loading, uniform wear and increased belt life
| Competitor Name | Cross-Reference Number |
|---|---|
| Motion Industries | 00725712 |
-
Alternative Part Number93320750
-
UNSPSC26111801
-
Package DescriptionEACH
-
Standards/ApprovalsARPM/RMA IP-3-2/IP-3-3
-
Instruction/Installation Manual
-
Catalog
-
Specification Sheet
Recently Viewed
Gates® Power Transmission Super HC® 3V750 Banded Heavy Duty V-Belt, 3V Section, 3/8 in W Top, 75 in L Outside, 21/64 in THK, Chloroprene
Combines the strength of a wrapped belt construction with the economies of a narrow section V-belt. Transmits more power in a given space and allows more compact drive design than classical section V-belts. In short, it offers you more power and considerably reduces the space needed. This significantly cuts the overall drive cost. Super HC™ V-belts also have exclusive Gates construction features for longer life on your drives.
Gates® Power Transmission Super HC® Molded Notch PowerBand® 5/3VX1060 Heavy Duty Molded Notch V-Belt, 3VX Section, 3/8 in W Top, 106 in L Outside, 21/64 in THK, EPDM
When your power transmission application needs a high horsepower solution but is constrained by drive weight or physical space, the answer is Super HC™ Molded Notch belts. Our proprietary ethylene construction process provides a superior combination of flex and load-carrying capacity, transmitting up to three times the horsepower versus comparably sized belts. Super HC MN V-belts put more power where high speeds, high speed ratios or small pulley diameters are required, offering significant benefits over classical section V-belts.
TL-24-H-200-2012 Dodge® 113712 Dyna-Sync Type KF1 Timing Belt Pulley, 1/2 to 2 in Taper-Lock® Bore, 4.06 in OD, 24 Grooves, 3.82 in Dia Pitch, 2.34 in W Face
TL24H200-2012 Dodge® 113712 Dyna-Sync Type KF1 Timing Belt Pulley, 1/2 to 2 in Taper-Lock® Bore, 4.06 in OD, 24 Grooves, 3.82 in Dia Pitch, 2.34 in W Face
Browning 30:1 RAIDER WORM GEAR REDUCERS BRW 100-Q-56-LR-30
Raider® Plus worm gear reducers represent the most flexible worm gear product in the power transmission solutions portfolio. With a large variety of add-on accessories, the Raider® Plus line of worm gear reducers is a problem solver. Four unit styles form the basis of this vast product offering. These are the universal style (U style, shaft input) with an output shaft and the C-face style (Q style, input quill) with an output shaft. Both the U and Q styles are also available with hollow outputs. The Raider® Plus worm gear reducer is designed as an industry interchange. It is dimensionally interchangeable with the major industry competitors.
Browning® 1064740 Type A Solid Multiple Sheave, 1/2 to 2 in QD® Bore, 5 in OD, 3 Grooves, 4.95 in Dia Pitch, 1-1/2 in W Face
Browning® offers an extensive multi-groove sheave offering. This includes Browning® Split-Taper® and QD® bushing designs. This means maximum economy and versatility for your application. Truly the right drive every time our exclusive B5V® sheaves have a patented design that offers 5V horsepower in the economy of a B section sheave. B5V® sheaves serve 90% of all applications from 10 to 150 hp. This can reduce cost up to 40% over traditional designs.
3/4 -MALE PIPE THREADX4 SCHEDULE 80 BLACK NIPPLE
