Gates® Power Transmission Polyflex® JB® 4/5M925JB Joined Band Light Duty V-Belt, 5M Section, 3/16 in W Top, 36.42 in L Outside, 1/8 in THK, High Modulus Polyurethane
Developed by Gates and produced to patented manufacturing processes, these belts provide more load-carrying capacity at higher speeds to small multiple V-belt precision drives. This results in significant cost savings and improved design freedom.
-
BrandGates® Power Transmission
-
UPC72053833287
-
Manufacturer Part Number4/5M925JB
-
CountryUSA|Canada
-
Temperature Range-65 to 180 deg F
-
Thickness1/8 in
-
MaterialHigh Modulus Polyurethane
-
Top Width3/16 in
-
Reinforced MaterialPolyester
-
TypeJoined Band Light Duty
-
Minimum Pulley Diameter1.273 in
-
Section Size5M
-
Series8912
-
Number of Ribs4
-
Outside Length36.42 in
- High modulus polyurethane compound resists fatigue, wear, ozone and most environmental conditions
- Precise casting method eliminates layers and overlaps for smooth running and low vibration
- Ribbed backing provides greater lateral stability and relieves bending stress
- Joined belt construction provides high stability, preventing belts from turning over or coming off of the drive
-
Alternative Part Number89124925
-
UNSPSC26111801
-
Package DescriptionEACH
-
Standards/ApprovalsRMA Standard
-
Catalog
-
Instruction/Installation Manual
Recently Viewed
Gates® Power Transmission Polyflex® JB® 4/5M925JB Joined Band Light Duty V-Belt, 5M Section, 3/16 in W Top, 36.42 in L Outside, 1/8 in THK, High Modulus Polyurethane
Developed by Gates and produced to patented manufacturing processes, these belts provide more load-carrying capacity at higher speeds to small multiple V-belt precision drives. This results in significant cost savings and improved design freedom.
Gates® Power Transmission Super HC® 3V710 Banded Heavy Duty V-Belt, 3V Section, 3/8 in W Top, 71 in L Outside, 21/64 in THK, Chloroprene
Combines the strength of a wrapped belt construction with the economies of a narrow section V-belt. Transmits more power in a given space and allows more compact drive design than classical section V-belts. In short, it offers you more power and considerably reduces the space needed. This significantly cuts the overall drive cost. Super HC™ V-belts also have exclusive Gates construction features for longer life on your drives.
3.438" X 4.757" X .859" SCOTSEAL-CHI34387 >
When your power transmission application needs a high horsepower solution but is constrained by drive weight or physical space, the answer is Super HC™ Molded Notch belts. Our proprietary ethylene construction process provides a superior combination of flex and load-carrying capacity, transmitting up to three times the horsepower versus comparably sized belts. Super HC MN V-belts put more power where high speeds, high speed ratios or small pulley diameters are required, offering significant benefits over classical section V-belts.
MasterDrive R1-1.11/16 R1 Series Double Split Tapered Bushing, 1.68 in Dia Bore, 4 in Dia Barrel, 5-3/8 in Dia Flange, 2-7/8 in OAL, Ductile Iron
Double Split Tapered Bushings are used on sheaves, sprockets and pulleys to provide increased clamping force over standard bore-to-size components. They are tapered in design with flanges and utilize cap screws to tighten on the shaft. The double split design assures better concentricity to the shaft and provides the highest degree of mechanical locking component to component. Most sizes are contructed of ductile iron to provide strength and duarability. Each Split Taper Bushing series is produced in a number of different bore size options, most that include a keyway, allowing users flexibility when using sheaves, sprockets or pulleys in applications that may utilize various shaft sizes.
Gates® Power Transmission Super HC® 3V800 Banded Heavy Duty V-Belt, 3V Section, 3/8 in W Top, 80 in L Outside, 21/64 in THK, Chloroprene
Combines the strength of a wrapped belt construction with the economies of a narrow section V-belt. Transmits more power in a given space and allows more compact drive design than classical section V-belts. In short, it offers you more power and considerably reduces the space needed. This significantly cuts the overall drive cost. Super HC™ V-belts also have exclusive Gates construction features for longer life on your drives.
