Gates 4-L-600 FHP V-BELTS GAT 2600
Engineered with all the qualities of a great belt, including flexibility, durability and resistance to contaminants. It includes a thin profile, designed for small-diameter sheaves and a lower cord positioning to improve belt performance on light-duty belt drives and in your backside idler applications.
-
BrandGates® Power Transmission
-
UPC72053003659
-
Manufacturer Part Number4L600
-
CountryUSA|Canada
-
Thickness5/16 in
-
MaterialEPDM
-
Top Width1/2 in
-
Reinforced MaterialFlex-Bonded Polyester
-
TypeLight Duty Banded
-
Minimum Pulley Diameter3.183 in
-
Section Size4L
-
Series8400
-
Number of Ribs1
-
Outside Length60 in
- Flex-bonded cords are strongly bonded to the body of the belt resulting in equal load distribution and the absorption of bending stress without cord deterioration
- The Flex-Weave® cover is constructed for longer cover life, providing extended protection to the core of the belt from oil, dirt and heat
- Gates® curves provide proper cord support and full contact with the sheave groove for uniform loading, uniform wear and increased belt life
- Truflex® belts feature superior length stability for minimal take up requirements
-
Alternative Part Number84002600|2600
-
UNSPSC26111801
-
Package DescriptionEACH
-
Standards/ApprovalsARPM/RMA IP-3-2/IP-3-3
-
Specification Sheet
-
Catalog
-
Instruction/Installation Manual
Recently Viewed
Engineered with all the qualities of a great belt, including flexibility, durability and resistance to contaminants. It includes a thin profile, designed for small-diameter sheaves and a lower cord positioning to improve belt performance on light-duty belt drives and in your backside idler applications.
RECOMMENDED USE: For use on Paint (Body filler, paint, primers), Metal (Ferrous metals), Aluminum (Non-ferrous metals) and Wood (Plastics, wood and fiberglass) FEATURES: Aluminum oxide grain provides a fast cut with long life, stearate coating and semi open coat structure prevents loading. 80-150 Grit: "D" - heavy-weight, low flexibility paper backing. 180-400 Grit: "C" - medium-weight, low flexibility paper backing. For automotive body work, removing varnish from wood, sanding fiberglass, and for use on metal. For use on random orbital or low speed DA sanders - For dry use only. Available in PSA Disc Rolls. COMPATIBILITY: Disc Sander SPECIFICATIONS: 6" diameter, 400 grit
Incandescent lamps are still commonly used in homes and businesses and with our wide selection, we have enough shapes, wattages and finishes to fit almost every application and need. Many of our incandescent lamps are also available in an extended life, 130 VAC version, with even more environmentally friendly alternatives coming soon.
HCI Preferred Supplier 560544 Pipe Tee, Steel, 1/4 x 1/4 x 1/4 in Nominal, FNPT x FNPT x FNPT End Style
HCI Preferred Supplier 560544 Pipe Tee, Steel, 1/4 x 1/4 x 1/4 in Nominal, FNPT x FNPT x FNPT End Style
Browning® Classical Gripbelt® 1027101 AK Series Type 3 Single Groove Sheave, Finished Bore, 1 in Dia Bore, 6.95 in OD, 6.9 in (A)/6.36 in (3L) Dia Pitch, 3/4 in W Face
Browning® Classical Gripbelt® 1027101 AK Series Type 3 Single Groove Sheave, Finished Bore, 1 in Dia Bore, 6.95 in OD, 6.9 in (A)/6.36 in (3L) Dia Pitch, 3/4 in W Face
Dixon® FM15F15T Hex Female to Male Nipple, 1-1/2 in x 1-1/2 in L, Brass, Female NST (NH) x MNPT, Domestic
Dixon® FM15F15T Hex Female to Male Nipple, 1-1/2 in x 1-1/2 in L, Brass, Female NST (NH) x MNPT, Domestic
