Truflex® 4L460 Light Duty V-Belt, 4L Section, 1/2 in W Top, 46 in L Outside, 5/16 in THK
Gates® belts feature superior length stability for minimal take-up requirements.
-
BrandGates® Power Transmission
-
UPC072053003338
-
Manufacturer Part Number4L460
-
CountryUSA|Canada
-
Thickness5/16 in
-
Top Width1/2 in
-
Reinforced MaterialPolyester
-
TypeLight Duty
-
Section Size4L
-
Series8400
-
Number of Ribs1
-
Outside Length46 in
- Gates® curves provide proper cord support and full contact with the sheave-groove for uniform loading, uniform wear and increased belt life
- Flex bonded cords are strongly bonded to the body of the belt resulting in equal load distribution and the absorption of bending stress without cord deterioration
- The Flex-Weave® cover is a patented construction for longer cover life, providing extended protection to the core of the belt from oil, dirt and heat
- Recommended sheaves light duty sheaves-bored-to-size, light duty sheaves-variable pitch and light duty sheaves-bushed
- Meets RMA standards oil, heat resistant and static conductivity requirements
- Suitable for all industrial light duty applications, usually using fractional horsepower (FHP) motors
-
Alternative Part Number84002460
-
UNSPSC26111801
-
Package DescriptionEACH
-
Standards/ApprovalsRMA Standard
-
Catalog
Recently Viewed
Truflex® 4L460 Light Duty V-Belt, 4L Section, 1/2 in W Top, 46 in L Outside, 5/16 in THK
Gates® belts feature superior length stability for minimal take-up requirements.
John Guest® Speedfit® PEI0420 Coupler, 1/2 in Nominal, CTS End Style, Plastic, Domestic
Push-fit plastic fitting for the connection of plastic, copper, and CPVC pipe. Designed, manufactured and assembled by John Guest Speedfit. Simply push the fitting fully onto the pipe and twist the plastic nut clockwise to lock in place. Should the need arise to demount the connection unlock the nut and push the collet towards the body of the fitting and pull the pipe to release. The fitting ensures an easier working environment in confined places, is approved for behind the wall installations, and removes the need for hot works on site. Installation can be reduced by around 40% when compared to traditional fixing methods.
John Guest® Speedfit® PEI0428 Coupler, 3/4 in Nominal, CTS End Style, Plastic, Domestic
Push-fit plastic fitting for the connection of plastic, copper, and CPVC pipe. Designed, manufactured and assembled by John Guest Speedfit. Simply push the fitting fully onto the pipe and twist the plastic nut clockwise to lock in place. Should the need arise to demount the connection unlock the nut and push the collet towards the body of the fitting and pull the pipe to release. The fitting ensures an easier working environment in confined places, is approved for behind the wall installations, and removes the need for hot works on site. Installation can be reduced by around 40% when compared to traditional fixing methods.
Sharkbite® U514LF Pipe End Cap, 1/2 in Nominal, Push-Fit End Style, Brass, Import
SharkBite® End Caps are push-to-connect and are the easiest way to cap off your Copper, PEX, CPVC or PE-RT pipe lines. There is no soldering, clamps, unions or glue required. These fittings are great for stub outs and pressure testing a home as they take no time to cure. They are easily removed with a Disconnect Clip. All SharkBite® fittings are capable of being installed on either wet or dry pipe. This product is rated for up to 200 psi and 200 deg F.
John Guest® Speedfit® 3/4SCP Slip Connector, 3/4 in Nominal, CTS End Style, Plastic, Domestic
An innovative push-fit fitting which provides a quick and easy method of replacing burst or damaged pipe without the need to alter existing pipe work. See below for a step by step installation guide.
John Guest® Speedfit® PEI0220 Union Tee, 1/2 in Nominal, CTS End Style, Plastic, Domestic
Push-fit plastic fitting for the connection of plastic, copper, and CPVC pipe. Designed, manufactured and assembled by John Guest Speedfit. Simply push the fitting fully onto the pipe and twist the plastic nut clockwise to lock in place. Should the need arise to demount the connection unlock the nut and push the collet towards the body of the fitting and pull the pipe to release. The fitting ensures an easier working environment in confined places, is approved for behind the wall installations, and removes the need for hot works on site. Installation can be reduced by around 40% when compared to traditional fixing methods.
