HTD Belts
TB Wood's® QT Power Chain® synchronous belt drives are constructed with materials of the highest quality and strength. Extensive development performed by research and development has resulted in the homogeneous integration of all components, the cohesive bond of which imparts superior torque capacity giving QT Power Chain® drives the ability to exceed the performance of existing belt drives and compete with chain and other mechanical systems.
TB Wood's® synchronous Plus synchronous drives offer the added flexibility of a dual sprocket design that features both metric and standard-tapped holes coupled with a high-capacity synchronous Plus belt. As a result, the synchronous Plus drive offers a significantly higher horsepower rating at the standard industry price.
800-8MX-21 Dodge® 142648 HT500 High Torque Belt, 8 mm Pitch, 800 mm OAL, 21 mm W
3136-14MX-37 Dodge® 142790 HT500 High Torque Belt, 14 mm Pitch, 3136 mm OAL, 37 mm W
3136-14MX-37 Dodge® 142790 HT500 High Torque Belt, 14 mm Pitch, 3136 mm OAL, 37 mm W
1190-14M-55 Dodge® 146555 HT200 Single Sided High Torque Belt, 85 Teeth, 14 mm Pitch, 1190 mm OAL, 55 mm W, Chloroprene Rubber
Dodge® synchronous belt drives require no lubrication. They provide a positive engagement between a toothed belt and a toothed sprocket and are offered with curvilinear, modified curvilinear and trapezoidal tooth profiles.
Recently Viewed
Akro-Mils® 30265 Heavy Duty Storage Bin, 18 in L x 8-1/4 in W x 9 in H, Blue
Akro-Mils® 30265 Heavy Duty Storage Bin, 18 in L x 8-1/4 in W x 9 in H, Blue
Browning® finished bore sprockets are offered in single strands. Offerings include 35 to 100 pitch range. Finished bore sprockets are available from 3/8 to 2-7/16 in. Hardened teeth are available up to 30 teeth.
BEARING-GUL618012RS >
Koyo TRC-2435 Double Direction Thrust Washer, 38.1 mm ID x 55.55 mm OD, 2.41 mm W
Ideally, a thrust washer should be stationary with respect to and piloted by its supporting or backing member whether or not this is an integral part of the shaft or housing. There should be no rubbing action between the thrust washer and any other machine member. The economics of design, however, often preclude these ideal conditions and thrust washers must be employed in another manner. In such cases, design details should be determined in consultation with your representative.
MORSE® 10610 1314 General Purpose Taper Length Drill, 15/16 in Drill - Fraction, 0.9375 in Drill - Decimal Inch, 10-3/4 in OAL, HSS, Black Oxide
MORSE® 10610 1314 General Purpose Taper Length Drill, 15/16 in Drill - Fraction, 0.9375 in Drill - Decimal Inch, 10-3/4 in OAL, HSS, Black Oxide
Coilhose® BL10 Heavy Duty Mechanical Tool Balancer, 6.5 to 13.5 lb Load, 8 ft L Cable
Coilhose® BL10 Heavy Duty Mechanical Tool Balancer, 6.5 to 13.5 lb Load, 8 ft L Cable
