Koyo Bearing METRIC TAPERED ROLLER BEARING SETS KOY 32209-JR
Tapered roller bearing are designed such that cup, cone and rollers have tapered surfaces whose apexes converge at a common point on the bearing axis. Along with metric series bearing, inch series bearing are also available. This type of bearing is suitable for applications that involve heavy or impact loading.
-
BrandKoyo
-
UPC605790359248
-
Manufacturer Part Number32209JR
-
CountryUSA
-
Load Capacity84.2 kN Dynamic/104 kN Static
-
Cage MaterialPressed Steel
-
Maximum Speed4600 rpm Grease/6100 rpm Oil
-
TypeCaged
-
Width24.75 mm
-
SeriesMetric Series
-
Number of Rows1
-
Outside Diameter85 mm
-
Bore Diameter45 mm
- Ability to carry radial and axial load in one direction, because an axial component of force is produced when this type of bearing is loaded radially, two bearings are used together facing one another or two or more bearings are matched and used
- There are the standard, medium and steep type which are different in contact angle size, medium tapered metric series bearing are identified by the supplementary code
- Bearing whose cup width, cup small inside diameter and contact angle are determined in accordance with ISO 355 specifications are identified by the supplementary code
-
Alternative Part NumberHI-CAP32209JR
-
UNSPSC31171505
-
Catalog
Recently Viewed
Tapered roller bearing are designed such that cup, cone and rollers have tapered surfaces whose apexes converge at a common point on the bearing axis. Along with metric series bearing, inch series bearing are also available. This type of bearing is suitable for applications that involve heavy or impact loading.
Koyo 1922 Cylindrical Bearing Cup, 57.15 mm OD, 15.875 mm W Cup, 19.845 mm W Bearing, 53.5 mm Dia Max House Shoulder
Koyo 47686 Type-TS Cone, 3-1/4 in Dia Bore, 1-5/16 in W Cone, 0.14 in Max Shaft Fillet Radius, 245 kN Load, For Use With 1-Row Tapered Roller Bearings
Koyo 2520 Type-TS Cup, 2.615 in OD, 13/16 in W Cup, 1 in W Bearing, 0.13 in Max House Fillet Radius
PlumbPakĀ® 10300CK J-Bend, 1-1/4 in Nominal, 22 ga, Brass, Polished Chrome
ā¢ Shaft Diameter (Inside Diameter): 22.00 mm (0.866 inches)
ā¢ Housing Bore (Outside Diameter): 35.00 mm (1.378 inches)
ā¢ Seal Width (Thickness): 6.00 mm or 5.00 mm depending on casing preference
ā¢ Design Profile: Standard double-lip configuration (TC Style) featuring a primary spring-loaded internal lip for grease retention and an external dust lip to protect the internal assembly from outdoor grit and moisture.
