Koyo 30308DJR Metric Series Caged Tapered Roller Bearing, 40 mm Dia Bore, 90 mm OD, 1 Row, 25.25 mm W, 80.5 kN Dynamic/90.2 kN Static Load
Tapered roller bearing are designed such that cup, cone and rollers have tapered surfaces whose apexes converge at a common point on the bearing axis. Along with metric series bearing, inch series bearing are also available. This type of bearing is suitable for applications that involve heavy or impact loading.
-
BrandKoyo
-
UPC605790020308
-
Manufacturer Part Number30308DJR
-
CountryUSA
-
Load Capacity80.5 kN Dynamic/90.2 kN Static
-
Cage MaterialPressed Steel
-
Maximum Speed3800 rpm Grease/5300 rpm Oil
-
TypeCaged
-
Width25.25 mm
-
SeriesMetric Series
-
Number of Rows1
-
Outside Diameter90 mm
-
Bore Diameter40 mm
- Ability to carry radial and axial load in one direction, because an axial component of force is produced when this type of bearing is loaded radially, two bearings are used together facing one another or two or more bearings are matched and used
- There are the standard, medium and steep type which are different in contact angle size, medium tapered metric series bearing are identified by the supplementary code "C" which is added as a suffix to bearing numbers
- Bearing whose cup width, cup small inside diameter and contact angle are determined in accordance with ISO 355 specifications are identified by the supplementary code "J" as suffix
-
UNSPSC31171505
-
Standards/ApprovalsABEC1 Class P0
-
Catalog
Recently Viewed
Koyo 30308DJR Metric Series Caged Tapered Roller Bearing, 40 mm Dia Bore, 90 mm OD, 1 Row, 25.25 mm W, 80.5 kN Dynamic/90.2 kN Static Load
Tapered roller bearing are designed such that cup, cone and rollers have tapered surfaces whose apexes converge at a common point on the bearing axis. Along with metric series bearing, inch series bearing are also available. This type of bearing is suitable for applications that involve heavy or impact loading.
Sure-Grip® quick detachable bushings are easy to install and remove. Split-through flange and taper provide a true clamp on the shaft that is equivalent to a shrink fit. All sizes except JA and QT have a set screw over the key to help maintain the bushing's position on the shaft until the cap screws are securely tightened. Versatile Sure-Grip® bushings permit the mounting of the same mating part on shafts of different diameters and the mounting of different sheaves on the same shaft using the same bushing.
10-GRV BANDED B-144 V-BELT-JAS10RB144 >
Leave it to 'Leviton® to patent an innovative lampholder that will enable manufacturers and designers of open fixtures to comply with 2005 NFPA 70 code changes. The changes require a safety feature that will prevent users from relamping with HID lamps that do not have an inner protective shield. Leviton- open fixture lampholders are designed to accept only shielded metal halide lamps, preventing the possibility of unsafe relamping and ensuring compliance. Open fixture lamps are an increasingly popular choice with manufacturers because they operate at cooler temperatures and allow for easy relamping.
55-GALLON LUBRIPLATE OIL-LBRSPO26655GAL>
Diablo® D0724A Combination Diamond Knockout Laser Cut Circular Saw Blade, 7-1/4 in Dia x 0.04 in THK, 5/8 in Arbor, Carbide Blade, 24 Teeth
Diablo® framing blades give exceptional long life in ripping and crosscutting applications. Diablo® thin kerf requires less power from your saw, so it's the perfect blade for portable tools. Laser-cut stabilizer vents for reduced vibration and precise cuts. Durable micro grain titanium carbide for razor sharp cuts and long life. Perma-SHIELD® permanent coating is a superior aluminum alloy coating that helps reduce friction, heat build-up, gumming and is resistant to rust, which add up to longer blade life. Laser-cut thin kerf gives fast, clean cuts.
