Koyo 30204JR Metric Series Caged Tapered Roller Bearing, 20 mm Dia Bore, 47 mm OD, 1 Row, 15.25 mm W, 27 kN Dynamic/27.2 kN Static Load
Tapered roller bearing are designed such that cup, cone and rollers have tapered surfaces whose apexes converge at a common point on the bearing axis. Along with metric series bearing, inch series bearing are also available. This type of bearing is suitable for applications that involve heavy or impact loading.
-
BrandKoyo
-
UPC605790122927
-
Manufacturer Part Number30204JR
-
CountryUSA
-
Load Capacity27 kN Dynamic/27.2 kN Static
-
Cage MaterialPressed Steel
-
Maximum Speed8700 rpm Grease/12000 rpm Oil
-
TypeCaged
-
Width15.25 mm
-
SeriesMetric Series
-
Number of Rows1
-
Outside Diameter47 mm
-
Bore Diameter20 mm
- Ability to carry radial and axial load in one direction, because an axial component of force is produced when this type of bearing is loaded radially, two bearings are used together facing one another or two or more bearings are matched and used
- There are the standard, medium and steep type which are different in contact angle size, medium tapered metric series bearing are identified by the supplementary code "C" which is added as a suffix to bearing numbers
- Bearing whose cup width, cup small inside diameter and contact angle are determined in accordance with ISO 355 specifications are identified by the supplementary code "J" as suffix
-
Alternative Part NumberHI-CAP30204JR
-
UNSPSC31171505
-
Standards/ApprovalsABEC1 Class P0
-
Catalog
Recently Viewed
Koyo 30204JR Metric Series Caged Tapered Roller Bearing, 20 mm Dia Bore, 47 mm OD, 1 Row, 15.25 mm W, 27 kN Dynamic/27.2 kN Static Load
Tapered roller bearing are designed such that cup, cone and rollers have tapered surfaces whose apexes converge at a common point on the bearing axis. Along with metric series bearing, inch series bearing are also available. This type of bearing is suitable for applications that involve heavy or impact loading.
ALAN 12-THHN ORANGE STRANDED WIRE. THE THHN CONDUCTORS ARE PRIMARILY USED IN CONDUIT AS BRANCH CIRCUITS IN COMMERCIAL OR INDUSTRIAL APPLICATIONS.
TYPE THHN IS AVAILABLE STRANDED IN SIZES 14 AWG -750 KCMIT. THE CONDUCTORS ARE SOFT-ANNEALED, STRANDED OR SOLID COPPER AND ARE INSULATED WITH A TOUGH HEAT AND MOISTURE-RESISTANT POLYVINYL CHLORIDE, OVER WHICH A NYLON JACKSON IS APPLIED.
ALE12THHNORG >
HCI Preferred Supplier 940179 Ball Valve, 2-1/2 in Nominal, FNPT End Style, Forged Brass Body, Full Port, PTFE Stem Seal Softgoods
HCI Preferred Supplier 940179 Ball Valve, 2-1/2 in Nominal, FNPT End Style, Forged Brass Body, Full Port, PTFE Stem Seal Softgoods
Remke Tuff-Sealâ„¢ 7303-012R Closed Mesh Insulated Single Weave Wide Range Strain Relief Grip With Galvanized Steel Mesh, 0.7 to 0.97 in Cable, For Use With 1 in NPT Connector, Aluminum
Tuff-Sealâ„¢ Wire Mesh Cable Grips distribute stress over a large area to prevent damage to wire, cable and flexible conduit. They are built to perform their task over an extended period of time without loosening their hold. All Remke wire mesh grips are available in a wide selection of cable ranges and eye styles where applicable and can be used in conjunction with any RSR cord connector.
Proto® J202G Slip-Joint Thin Needle Nose Plier With Wire Cutter, 1-15/16 in L x 1-1/16 in W Forged Alloy Steel Jaw, 6-11/16 in OAL
19" DEEP REACH WIRETWISTER PLIERS

