Koyo LM11749 Type-TS Cone, 11/16 in Dia Bore, 0.575 in W Cone, 0.05 in Max Shaft Fillet Radius, 31.8 kN Load, For Use With 1-Row Tapered Roller Bearings
Koyo LM11749 Type-TS Cone, 11/16 in Dia Bore, 0.575 in W Cone, 0.05 in Max Shaft Fillet Radius, 31.8 kN Load, For Use With 1-Row Tapered Roller Bearings
-
BrandKoyo
-
UPC605790358562
-
Manufacturer Part NumberLM11749
-
CountryUSA
-
Load Capacity31.8 kN
-
Cage MaterialSteel
-
TypeType-TS
-
Bore Diameter11/16 in
-
Suitable For Use With1-Row Tapered Roller Bearings
- 31.8 kN dynamic/26 kN static load
-
UNSPSC31171527
-
Standards/ApprovalsAISI/SAE 52100
-
Catalog
Recently Viewed
Koyo LM11749 Type-TS Cone, 11/16 in Dia Bore, 0.575 in W Cone, 0.05 in Max Shaft Fillet Radius, 31.8 kN Load, For Use With 1-Row Tapered Roller Bearings
Koyo LM11749 Type-TS Cone, 11/16 in Dia Bore, 0.575 in W Cone, 0.05 in Max Shaft Fillet Radius, 31.8 kN Load, For Use With 1-Row Tapered Roller Bearings
FREUDENBERG Simmering® 75040594 B1 Oil Seal, 45 mm ID x 72 mm OD, 10 mm W, NBR Lip, 72 Durometer, Import, Transcom 15X28X5-SC
FREUDENBERG Simmering® 15X28X5SC-BX B1 Oil Seal, 45 mm ID x 72 mm OD, 10 mm W, NBR Lip, 72 Durometer, Import
FREUDENBERG Simmering® 75041724 B1SL Double Lip Oil Seal With Dust Lip, 75 mm ID x 95 mm OD, 10 mm W, NBR Lip, Transcom 29 X 38 X 4-TC
FREUDENBERG Simmering® 29X38X4TC-BX B1SL Double Lip Oil Seal With Dust Lip, 75 mm ID x 95 mm OD, 10 mm W, NBR Lip
Spray on® LU711 All-Purpose Lubricant (The Protector&rade;) Aerosol is an ultra-thin film, transparent blend of high quality petroleum distillates formulated to ensure maximum moisture displacement. Its film resists the collection of abrasive particles on delicate contacts and connectors. This general maintenance penetrant is unmatched in its versatility & quality.
Lincoln® 80933 Coupler, For Use With 7/8 inch Diameter Button Head Fitting, 4000 Working Pressure, 7/16-27 Thread Size
Lincoln® 80933 Coupler, For Use With 7/8 inch Diameter Button Head Fitting, 4000 Working Pressure, 7/16-27 Thread Size
Dichtomatik N70125 O-Ring, 125 Dash Number, 1.299 in ID x 1.505 in OD, Nitrile Rubber, 70 Shore A Durometer, Import
O-rings are closed circular rings of circular cross-section. They are made through vulcanization from form tools as a complete ring. The sealing function of the O-ring is achieved by the deformation of the cross-section when installed and compressed in its housing. The O-ring can be compressed either radially or axially in its installation housing. In operating conditions the pressure exerted by the media reinforces the sealing function, as under pressure the elastomer material functions as a non-compressible fluid.
