CONS NK-12/12 NK Outer Ring Roller Bearing, 12 mm Dia Bore, 19 mm Dia Outside, 1 Rows, 12 mm W, 6.71 kN Dynamic, 8.15 kN Static Load
CONS NK-12/12 NK Outer Ring Roller Bearing, 12 mm Dia Bore, 19 mm Dia Outside, 1 Rows, 12 mm W, 6.71 kN Dynamic, 8.15 kN Static Load
-
BrandCONS
-
UPC644075080941
-
Manufacturer Part NumberNK-12/12
-
CountryUSA
-
Load Capacity6.71 kN Dynamic, 8.15 kN Static
-
Maximum Speed26000 rpm Reference, 30000 rpm Limiting
-
TypeOuter Ring
-
Width12 mm
-
SeriesNK
-
Number of Rows1
-
Outside Diameter19 mm
-
Bore Diameter12 mm
- The ability to handle a larger, more rigid shaft in a given application
- Excellent rolling characteristics within a small cross section
- Most sizes have a lubrication groove and hole in the O.D. of the outer race
-
Package DescriptionEACH
Recently Viewed
CONS NK-12/12 NK Outer Ring Roller Bearing, 12 mm Dia Bore, 19 mm Dia Outside, 1 Rows, 12 mm W, 6.71 kN Dynamic, 8.15 kN Static Load
CONS NK-12/12 NK Outer Ring Roller Bearing, 12 mm Dia Bore, 19 mm Dia Outside, 1 Rows, 12 mm W, 6.71 kN Dynamic, 8.15 kN Static Load
CONS NA-4903 NA Needle Roller Bearing, 17 mm Dia Bore, 30 mm Dia Outside, 1 Rows, 13 mm W, 11.4 kN Dynamic, 16.3 kN Static Load
CONS NA-4903 NA Needle Roller Bearing, 17 mm Dia Bore, 30 mm Dia Outside, 1 Rows, 13 mm W, 11.4 kN Dynamic, 16.3 kN Static Load
CONS SR-22206-2RS C/3 Roller Bearing, 30 mm Dia Bore, 62 mm Dia Outside, 20 mm W
CONS SR-22206-2RS C/3 Roller Bearing, 30 mm Dia Bore, 62 mm Dia Outside, 20 mm W
Koyo TRC-2435 Double Direction Thrust Washer, 38.1 mm ID x 55.55 mm OD, 2.41 mm W
Ideally, a thrust washer should be stationary with respect to and piloted by its supporting or backing member whether or not this is an integral part of the shaft or housing. There should be no rubbing action between the thrust washer and any other machine member. The economics of design, however, often preclude these ideal conditions and thrust washers must be employed in another manner. In such cases, design details should be determined in consultation with your representative.
CONS SR-22210-2RS C/3 Roller Bearing, 50 mm Dia Bore, 90 mm Dia Outside, 23 mm W
CONS SR-22210-2RS C/3 Roller Bearing, 50 mm Dia Bore, 90 mm Dia Outside, 23 mm W
