CONS MI-20-N MI Needle Roller Bearing, 1-1/4 in Dia Bore, 1-1/2 in Dia Outside, 1 in W
CONS MI-20-N MI Needle Roller Bearing, 1-1/4 in Dia Bore, 1-1/2 in Dia Outside, 1 in W
-
BrandCONS
-
UPC644075032681
-
Manufacturer Part NumberMI-20-N
-
CountryUSA
-
TypeNeedle
-
Width1 in
-
SeriesMI
-
Bearing MaterialSteel
-
Outside Diameter1-1/2 in
-
Bore Diameter1-1/4 in
- The ability to handle a larger, more rigid shaft in a given application
- Excellent rolling characteristics within a small cross section
- Inner races are made from 52100 steel and are hardened to Rockwell hardness 60-64 RC
- Inner races have an internal centered oil groove and one oil hole
-
Package DescriptionEACH
Recently Viewed
CONS MI-20-N MI Needle Roller Bearing, 1-1/4 in Dia Bore, 1-1/2 in Dia Outside, 1 in W
CONS MI-20-N MI Needle Roller Bearing, 1-1/4 in Dia Bore, 1-1/2 in Dia Outside, 1 in W
WERNER® 7116-1 7100-1 Type IAA Duty Single Section Straight Ladder, 16 ft H x 18-1/16 in W, 375 lb Load, 16 ft Top Step, Fiberglass
The 7116-1 one section round rung 16 ft straight ladder is made with non-conductive fiberglass rails. Easy to transport and maneuver, these ladders bear a duty rating of 375 lb making them durable and long lasting. The slip resistant, TRACTION-TRED® rungs are round, and the durable rail shields and shoe brackets help to protect the rails from damage. The plate and rung assemblies are riveted at four points to the side rails.
2" -FEMALE PIPE THREADX1" -FEMALE PIPE THREAD BLACK REDUCER-JPW2X1BR >
13-QUART GALVANIZED DRAIN PAN-JWH714427 >
Browning® 1296342 Automatic Torque Limiter, 3/4 in Straight Bore, 2-1/2 in OD, 800 in-lb (1 Spring)/1100 in-lb (2 Spring) Torque
Browning® torque limiters are torque control devices that slip under excessive load but automatically carry the desired load after the excess has been removed. The device can be easily adjusted to slip at a desired overload and automatically re-engage when overload is removed. Overload should be removed promptly since prolonged slippage can be detrimental to the friction disc. Generally, no resetting is required after the torque limiter has slipped. Torque limiters help prevent machine and product damage and costly downtime caused by shock loads, overloads or machine jams but should not be used as clutches.
ELECTRIC KEYLESS SOCKETS-JWH505544>
