Torrington 5/8"-ID NEEDLE BEARINGS TOR HJ-101812
Heavy duty needle roller bearings consists of a machined and ground channel-shaped outer ring with a complement of needle rollers and a cage. The high-strength cage retains and guides the rollers. An optional lubrication groove and hole in the outer ring facilitates re-lubrication. These bearings can be used with or without machined and ground inner ring, depending on the suitability of the shaft as a raceway surface.
-
BrandKoyo
-
UPC605790186196
-
Manufacturer Part NumberHJ-101812
-
CountryUSA
-
Load Capacity4350 lbf Dynamic/4650 lbf Static
-
Cage MaterialSteel
-
Temperature Rating250 deg F
-
Maximum Speed20000 rpm Grease/30000 rpm Oil
-
Closure TypeOpen
-
TypeCaged Heavy Duty
-
Width3/4 in
-
SeriesHJ Inch Series
-
Outside Diameter1-1/4 in
-
Bore Diameter5/8 in
- Thick outer ring provides maximum load capacity and shock resistance with a relatively small radial cross section
- Optimum speed and lubrication-retention capability
- Without inner ring
-
Alternative Part NumberHJ101812PBL125
-
UNSPSC31171505
-
Standards/ApprovalsANSI/ABMA 18.1|ASTM F2246|Military Standard MS 51961
-
Catalog
Recently Viewed
Heavy duty needle roller bearings consists of a machined and ground channel-shaped outer ring with a complement of needle rollers and a cage. The high-strength cage retains and guides the rollers. An optional lubrication groove and hole in the outer ring facilitates re-lubrication. These bearings can be used with or without machined and ground inner ring, depending on the suitability of the shaft as a raceway surface.
GP® 4076D Deep Length Socket, 1 in Drive, 2-3/8 in Socket, 6 Points
Compact size fits most mounting applications.
Irwin® 63914 Heavy Duty Jobber Length Drill Bit, 7/32 in Drill - Fraction, 0.2188 in Drill - Decimal Inch, 135 deg Point, HSS, TiN
Engineered for performance, the 7/32 in. Titanium Nitride Coating HSS Straight Shank, Jobber-Length Drill Bit resists heat and friction. Get up to 6x longer life than standard high-speed steel bits with this bit’s Titanium Nitride Coating. The 135° split-point tip limits walking and allows for immediate drilling. With premium high-speed steel, this bit has increased durability for convenience.
50-B-29-F-1-3/8 29 Tooth Sprockets For #50
29 TOOTH SPROCKETS FOR #50 CHAIN-IDC50B29F13/8 >
4" STIFF PUTTY KNIFE STAINLESS STEEL SCRAPER-JWH775967 >
