Torrington 2"-ID NEEDLE BEARINGS TOR HJ-324116
Heavy duty needle roller bearings consists of a machined and ground channel-shaped outer ring with a complement of needle rollers and a cage. The high-strength cage retains and guides the rollers. An optional lubrication groove and hole in the outer ring facilitates re-lubrication. These bearings can be used with or without machined and ground inner ring, depending on the suitability of the shaft as a raceway surface.
-
BrandKoyo
-
UPC605790190728
-
Manufacturer Part NumberHJ-324116
-
CountryUSA
-
Load Capacity12100 lbf Dynamic/20900 lbf Static
-
Cage MaterialSteel
-
Temperature Rating250 deg F
-
Maximum Speed5600 rpm Grease/8600 rpm Oil
-
Closure TypeOpen
-
TypeCaged Heavy Duty
-
Width1 in
-
SeriesHJ Inch Series
-
Outside Diameter2-9/16 in
-
Bore Diameter2 in
- Thick outer ring provides maximum load capacity and shock resistance with a relatively small radial cross section
- Optimum speed and lubrication-retention capability
- Without inner ring
-
Alternative Part NumberHJ324116PBL125
-
UNSPSC31171505
-
Standards/ApprovalsANSI/ABMA 18.1|ASTM F2246|Military Standard MS 51961
-
Catalog
Recently Viewed
Heavy duty needle roller bearings consists of a machined and ground channel-shaped outer ring with a complement of needle rollers and a cage. The high-strength cage retains and guides the rollers. An optional lubrication groove and hole in the outer ring facilitates re-lubrication. These bearings can be used with or without machined and ground inner ring, depending on the suitability of the shaft as a raceway surface.
CRC® 03097 Chlorinated Heavy Duty Non-Flammable Electrical Degreaser, 5 gal Pail, Moderate Odor/Scent, Clear, Liquid Form
CRC® 03097 Chlorinated Heavy Duty Non-Flammable Electrical Degreaser, 5 gal Pail, Moderate Odor/Scent, Clear, Liquid Form
Needle Roller Cam Followers have a heavy outer ring cross section and a full complement of needle rollers. They offer high dynamic and static load carrying capability, and anti-friction performance, in a compact design. They are used as track rollers, cam followers, and in a wide range of linear motion systems.
30 TOOTH SPROCKETS FOR #35 CHAIN -IDC35B30F5/8 >
RIDGID® 46840 Fitting, For Use With: Model 535 Pipe and Bolt Threading Machine, 90 deg
RIDGID® 46840 Fitting, For Use With: Model 535 Pipe and Bolt Threading Machine, 90 deg
A plates are flat sprockets with no hub extension on either side. They can be altered for your application with bolt holes, custom bores, hardened teeth or special hubs welded to them.
