Koyo HJ-243320 Inch Series Caged Heavy Duty Needle Roller Bearing, 1-1/2 in Dia Bore, 2-1/16 in OD, 1-1/4 in W, 13200 lbf Dynamic/21400 lbf Static Load
Heavy duty needle roller bearings consists of a machined and ground channel-shaped outer ring with a complement of needle rollers and a cage. The high-strength cage retains and guides the rollers. An optional lubrication groove and hole in the outer ring facilitates re-lubrication. These bearings can be used with or without machined and ground inner ring, depending on the suitability of the shaft as a raceway surface.
-
BrandKoyo
-
UPC605790190711
-
Manufacturer Part NumberHJ-243320
-
CountryUSA
-
Load Capacity13200 lbf Dynamic/21400 lbf Static
-
Cage MaterialSteel
-
Temperature Rating250 deg F
-
Maximum Speed7600 rpm Grease/12000 rpm Oil
-
Closure TypeOpen
-
TypeCaged Heavy Duty
-
Width1-1/4 in
-
SeriesHJ Inch Series
-
Outside Diameter2-1/16 in
-
Bore Diameter1-1/2 in
- Thick outer ring provides maximum load capacity and shock resistance with a relatively small radial cross section
- Optimum speed and lubrication-retention capability
- Without inner ring
| Competitor Name | Cross-Reference Number |
|---|---|
| Grainger | 779KE3 |
-
Alternative Part NumberHJ243320PBL125
-
UNSPSC31171505
-
Standards/ApprovalsANSI/ABMA 18.1|ASTM F2246|Military Standard MS 51961
-
Catalog
Recently Viewed
Koyo HJ-243320 Inch Series Caged Heavy Duty Needle Roller Bearing, 1-1/2 in Dia Bore, 2-1/16 in OD, 1-1/4 in W, 13200 lbf Dynamic/21400 lbf Static Load
Heavy duty needle roller bearings consists of a machined and ground channel-shaped outer ring with a complement of needle rollers and a cage. The high-strength cage retains and guides the rollers. An optional lubrication groove and hole in the outer ring facilitates re-lubrication. These bearings can be used with or without machined and ground inner ring, depending on the suitability of the shaft as a raceway surface.
Moline Bearing 19321207 Type E Pillow Block Bearing, 2-7/16 in Dia Bore, 7-7/8 in L Bolt Center-to-Center, 2-3/4 in Base to Bore Centerline, 10-1/2 in OAL x 5-11/16 in OAH
Made of Cast Iron, this Solid Type E 2-Bolt Pillow Block is a Non-Expansion Mounted Roller Bearing Bearing with a 2 7⁄16 in (2.4375 in) shaft size. Includes a Steel Set Screw Locking Insert with a Double Collar, an available Standard V-Guard Contact Seal made of Nitrile, and a Standard Painted finish, this bearing is ready for even the toughest of jobs.
