Koyo HJ-243320.2RS Inch Series Caged Heavy Duty Needle Roller Bearing, 1-1/2 in Dia Bore, 2-1/16 in OD, 1-1/4 in W, 10700 lbf Dynamic/16300 lbf Static Load
Heavy duty needle roller bearings consists of a machined and ground channel-shaped outer ring with a complement of needle rollers and a cage. The high-strength cage retains and guides the rollers. An optional lubrication groove and hole in the outer ring facilitates re-lubrication. These bearings can be used with or without machined and ground inner ring, depending on the suitability of the shaft as a raceway surface.
-
BrandKoyo
-
UPC605790216428
-
Manufacturer Part NumberHJ-243320.2RS
-
CountryUSA
-
Load Capacity10700 lbf Dynamic/16300 lbf Static
-
Cage MaterialSteel
-
Temperature Rating-25 to 225 deg F
-
Maximum Speed5100 rpm
-
Closure TypeContact Double Sealed
-
TypeCaged Heavy Duty
-
Width1-1/4 in
-
SeriesHJ Inch Series
-
Outside Diameter2-1/16 in
-
Bore Diameter1-1/2 in
- Thick outer ring provides maximum load capacity and shock resistance with a relatively small radial cross section
- Optimum speed and lubrication-retention capability
- Without inner ring
-
Alternative Part NumberHJ243320.2RSPBL125
-
UNSPSC31171505
-
Standards/ApprovalsANSI/ABMA 18.1|ASTM F2246|Military Standard MS 51961
-
Catalog
Recently Viewed
Koyo HJ-243320.2RS Inch Series Caged Heavy Duty Needle Roller Bearing, 1-1/2 in Dia Bore, 2-1/16 in OD, 1-1/4 in W, 10700 lbf Dynamic/16300 lbf Static Load
Heavy duty needle roller bearings consists of a machined and ground channel-shaped outer ring with a complement of needle rollers and a cage. The high-strength cage retains and guides the rollers. An optional lubrication groove and hole in the outer ring facilitates re-lubrication. These bearings can be used with or without machined and ground inner ring, depending on the suitability of the shaft as a raceway surface.
1/2" X 3-1/2" M/D OVAL DIE SPRINGS-LANSMDO500350 >
1-1/2" PIPE STAINLESS STEEL REPAIR CLAMP1-1/2" CLAMP ARE CONSTRUCTED OF TYPE 301 STAINLESS, WITH PLATED IRON LUGS TO PROVIDE UNIFORM PRESSURE; NON-DETERIORATING GASKET GIVES ANEX CELLENT SEAL. PLATED STEEL NUTS AND BOLT. MEASUREMENTS 1-1/2" IPS; SCH-JWH423731 >
4-BOLT BEARING FLANGES-IBI100MSZPG>
TAPERED ROLLER BEARING CONE-NTNH715345 >
BBI 644091 Partially Threaded Hex Bolt, M10x1.5, 65 mm L Under Head, 8.80 Grade, Medium Carbon Steel, Plain
BBI 644091 Partially Threaded Hex Bolt, M10x1.5, 65 mm L Under Head, 8.80 Grade, Medium Carbon Steel, Plain
