Drawn Cup Roller Clutches
Koyo RCB-162117 Inch Series Caged Round Bore Drawn Cup Roller Clutch With Integral Spring, 1 in Dia Bore, 1-5/16 in OD, 1-1/16 in W, CW/CCW, 439 in-lb Torque
Drawn Cup Needle Roller Clutches are similar to drawn cup needle roller bearings in design, however, they allow free rotation in only one direction while transmitting torque in the opposite direction. These designs use the same small radial section as drawn cup needle roller bearings and are offered as clutch-only units or as clutch and bearing assemblies.
Koyo RC-162110-FS Inch Series Caged Drawn Cup Roller Clutch, 1 in Dia Bore, 1.313 in OD, 5/8 in W, CW/CCW, 439 in-lb Torque
Drawn cup needle roller clutches are similar to drawn cup needle roller bearings in design, however, they allow free rotation in only one direction while transmitting torque in the opposite direction. These designs use the same small radial section as drawn cup needle roller bearings and are offered as clutch-only units or as clutch and bearing assemblies.
Recently Viewed
SCREW BIT DOUBLE END-JWH359661 >
Crescent® 8658FHB Replacement Spring, For Use With Crescent H.K. Porter 8690 Series Cutters
Crescent® 8658FHB Replacement Spring, For Use With Crescent H.K. Porter 8690 Series Cutters
TURBINE VIBRATOR-VIBBVS60>
4"-SQUARE 1/2"-RAISED SURFACE WITH 2-1/2"-DIAMETER KO - APL8378 >
3/16" X 48" X 750' BUBBLEWRAP - PAKDBS48 >
Starrett® PT18718 Snug Complete, 5/16 in Dia, 3/32 to 1/4 in Holding Capacity, For Use With 196 and 196M Universal Back Plunger Dial Indicator, 252 Height Transfer Gage, 57 and 257A and B Surface Gage
Post hole has a 5/16" diameter and 3/32-1/4" holding capacity. Can be used on our 252 Height Transfer Gage, 57 and 257A and B Surface Gages, on 657A Magnetic Base and Swivel Post Assembly.
