FED/Bronze 3/8" X 1/2" X 3/4" BRONZE BUSHINGS FEB CB-6-08-6
ISOSTATIC™ Century® 104026 Round Bore Sleeve Bearing, 3/8 in Dia Bore, 1/2 in OD, 3/4 in W
-
BrandISOSTATIC™
-
UPC846802013356
-
Manufacturer Part Number104026
-
CountryUSA
-
Temperature Rating-40 to 450 deg F
-
Maximum PV Rating75000 psi/sq-ft/min
-
Maximum Pressure3000 psi
-
Maximum Velocity750 sfpm
-
TypeRound Bore
-
Width3/4 in
-
Bearing MaterialSAE 660 Cast Bronze
-
Outside Diameter1/2 in
-
Bore Diameter3/8 in
- Standard stock products
- SAE 660/CA 932 copper 83%, tin 7%, lead 7% and zinc 3%
- Non-porous, highly dense grain structure for long life
- Offers good hardness, strength and wear resistance, excellent anti-frictional characteristics
- Tensile strength of 35000 psi, yield strength of 27000 psi and brinell hardness of 72
- Ideal for heavy loads at moderate speeds or light loads at high speeds
- Products made with excess material to finish to stated nominal dimensions
-
Alternative Part NumberCB-0608-06
-
UNSPSC31171509
-
Package Description1/PK
-
Standards/ApprovalsASTM B505|QOC-390B Type III B144-52-3B|REACH Compliant|PROP65: This product can expose you to chemicals including lead which is known to the state of California to cause birth defects or other reproductive harm. For more information go to www.P65WARNINGS.ca.gov
-
Specification Sheet
-
Catalog
Recently Viewed
ISOSTATIC™ Century® 104026 Round Bore Sleeve Bearing, 3/8 in Dia Bore, 1/2 in OD, 3/4 in W
Browning® 1223411 Minimum Plain Bore Type C1 Change Gear, 12 Diametral Pitch, 14.5 deg Pressure Angle, 3/4 in W Face, 28 Teeth, 2.333 in Dia Pitch, 1 in Dia Bore, Steel
Browning® offers a comprehensive line of off the shelf gears, including spur, miter and bevel as well as change gears. These are available in 20 deg pressure angle from 20 to 4 diametral pitch and 14.5 deg pressure angle from 48 to 3 diametral pitch. They are all designed to increase output, reduce costs and avoid the need for custom specials.
A faster alternative to the butt splice.The SpliceLine In-Line Wire Connector is a revolutionary in-line wire connector that utilizes patented push-in technology in a unique design to provide a crimp-free, solderless butt splice faster and easier. The 2-port model supports a wide range of either stranded or solid wires, allowing one connector to cover the same range as three traditional butt splices and installs two times faster than a traditional butt splice.The end-to-end connection of SpliceLine is a great solution for today’s pre-fab operations and also makes it perfect for lengthening short wires in tight spaces. It easily passes through ½ inch knockouts and the transparent polycarbonate housing allows for visual inspection, assuring a secure connection every time.
DOUBLE SEALED BALL BEARING-NTN6317LL >
Browning® offers a comprehensive line of off the shelf gears, including spur, miter and bevel as well as change gears. These are available in 20 deg pressure angle from 20 to 4 diametral pitch and 14.5 deg pressure angle from 48 to 3 diametral pitch. They are all designed to increase output, reduce costs and avoid the need for custom specials.
1" 90-DEGREE LIQUIDTITE CONNECTOR-ELESTC10090 >
