FED/Bronze 3/4" X 1" X 1" CAST BRONZE BUSHING FEB CB-12-16-8
ISOSTATIC™ Century® 104229 Round Bore Sleeve Bearing, 3/4 in Dia Bore, 1 in OD, 1 in W
-
BrandISOSTATIC™
-
UPC846802015381
-
Manufacturer Part Number104229
-
CountryUSA
-
Temperature Rating-40 to 450 deg F
-
Maximum PV Rating75000 psi/sq-ft/min
-
Maximum Pressure3000 psi
-
Maximum Velocity750 sfpm
-
TypeRound Bore
-
Width1 in
-
Bearing MaterialSAE 660 Cast Bronze
-
Outside Diameter1 in
-
Bore Diameter3/4 in
- Standard stock products
- SAE 660/CA 932 copper 83%, tin 7%, lead 7% and zinc 3%
- Non-porous, highly dense grain structure for long life
- Offers good hardness, strength and wear resistance, excellent anti-frictional characteristics
- Tensile strength of 35000 psi, yield strength of 27000 psi and brinell hardness of 72
- Ideal for heavy loads at moderate speeds or light loads at high speeds
- Products made with excess material to finish to stated nominal dimensions
-
Alternative Part NumberCB-1216-08
-
UNSPSC31171509
-
Package Description1/PK
-
Standards/ApprovalsASTM B505|QOC-390B Type III B144-52-3B|REACH Compliant|PROP65: This product can expose you to chemicals including lead which is known to the state of California to cause birth defects or other reproductive harm. For more information go to www.P65WARNINGS.ca.gov
-
Specification Sheet
-
Catalog
Recently Viewed
ISOSTATIC™ Century® 104229 Round Bore Sleeve Bearing, 3/4 in Dia Bore, 1 in OD, 1 in W
Browning® 1296482 T55L Automatic Torque Limiter, 1 in Finished Bore, 5-1/2 in OD, 3800 in-lb (1-Spring)/6800 in-lb (2-Spring) Torque
The Browning® torque limiter is a spring loaded friction style torque overload device. The load on the friction pads is adjusted so that the process torque is transmitted. An overload torque in excess of the set torque causes the unit to slip. This prevents overloads from transmitting through the system. When the load falls below the set level, the torque limiter stops slipping and transmits the torque. A torque limiter does not maintain phase between input and output. Although it is a similar size, the Browning® torque limiter has a higher torque density than the Morse® torque limiter. It is also well suited for applications that trip infrequently at high loads. It is most often used in a chain drive. A specially machined sprocket is inserted between the friction pads and acts as the slip interface. Torque capacity is up to 8800 in-lb.
PE3103 by Coilhose | Tubing | 5/16" OD x .236" ID | .038" Wall thickness | Natural | Polyethylene
ROLLING LADDER 3" SWIVEL CASTERS-LOU928000B >
Safety relief valves guard against over pressure conditions in compressors and other pressure vessels. These units are manufactured out of brass bar stock to ensure a non-porous, strong fitting. Seats are silicon rubber to provide a long leak free service life.
Krylon® A03650004 Industrial Marking Paint, 20 oz Container, Fluorescent Red/Orange, 664 Linear ft Coverage, >10 min Curing
