FED/Bronze 3/4"X15/16"X2-1/2" BRONZE BUSHINGS FEB CB-12-15-20
ISOSTATIC™ Century® 104223 Round Bore Sleeve Bearing, 3/4 in Dia Bore, 15/16 in OD, 2-1/2 in W
-
BrandISOSTATIC™
-
UPC846802015329
-
Manufacturer Part Number104223
-
CountryUSA
-
Temperature Rating-40 to 450 deg F
-
Maximum PV Rating75000 psi/sq-ft/min
-
Maximum Pressure3000 psi
-
Maximum Velocity750 sfpm
-
TypeRound Bore
-
Width2-1/2 in
-
Bearing MaterialSAE 660 Cast Bronze
-
Outside Diameter15/16 in
-
Bore Diameter3/4 in
- Standard stock products
- SAE 660/CA 932 copper 83%, tin 7%, lead 7% and zinc 3%
- Non-porous, highly dense grain structure for long life
- Offers good hardness, strength and wear resistance, excellent anti-frictional characteristics
- Tensile strength of 35000 psi, yield strength of 27000 psi and brinell hardness of 72
- Ideal for heavy loads at moderate speeds or light loads at high speeds
- Products made with excess material to finish to stated nominal dimensions
-
Alternative Part NumberCB-1215-20
-
UNSPSC31171509
-
Package Description1/PK
-
Standards/ApprovalsASTM B505|QOC-390B Type III B144-52-3B|REACH Compliant|PROP65: This product can expose you to chemicals including lead which is known to the state of California to cause birth defects or other reproductive harm. For more information go to www.P65WARNINGS.ca.gov
-
Catalog
-
Specification Sheet
Recently Viewed
ISOSTATIC™ Century® 104223 Round Bore Sleeve Bearing, 3/4 in Dia Bore, 15/16 in OD, 2-1/2 in W
IKO manufactures a wide range of radial Needle Roller Bearings to meet the needs of different applications and machine profiles. These include shell type bearings, needle roller cages for both general use and within engine connecting rods and machined type Needle Roller Bearings. Shell type Needle Roller Bearings are lightweight, low profile motion components designed to handle either high speeds or heavy loads, depending on the configuration. An outer ring made of high strength steel enables a streamlined profile with the lowest sectional height of all the Needle Roller Bearings.
1/2" X 5/8" USS SHOULDER BOLT-NBS7090500062 >
Browning® 1211150 Minimum Plain Bore Spur Gear, 16 Diametral Pitch, 14.5 deg, 1/2 in W Face, 40 Teeth, 2-1/2 in Dia Pitch, 1/2 in Dia Bore, Steel
Browning® offers a comprehensive line of off-the-shelf gears, including spur, miter, bevel and change gears. These are available in 20 deg pressure angle from 20 to 4 diametral pitch and 14-1/2 deg pressure angle from 48 to 3 diametral pitch. They are all designed to increase output, reduce costs and avoid the need for custom specials.
TCM13234VHY>
Ideal for use with threading machines, roll grooving, or other pipe working applications.
