FED/Bronze 1/2" X 11/16" X 1-1/8" SLEEVE BRG. FEB 2868-T-117
ISOSTATIC™ Oilube® 101228 Round Bore Sleeve Bearing, 1/2 in Dia Bore, 11/16 in OD, 1-1/8 in W
-
BrandISOSTATIC™
-
UPC846802002282
-
Manufacturer Part Number101228
-
CountryUSA
-
Temperature Rating10 to 175 deg F
-
Maximum PV Rating50000 psi/sq-ft/min
-
Maximum Pressure2000 psi
-
Maximum Velocity1200 sfpm
-
TypeRound Bore
-
Width1-1/8 in
-
Bearing MaterialSAE 841 Powdered Metal/Oil Impregnated Bronze
-
Outside Diameter11/16 in
-
Bore Diameter1/2 in
- Standard stock products
- SAE 841 copper (87 to 90%), tin (8 to 9%), carbon and other elements
- Powdered metal bronze providing interconnected reservoirs for oil
- Vacuum impregnated with SAE 30 oil during the manufacturing process
- Self-lubricating, when in motion oil rises to the surface for lubrication and restores itself when at rest
- Ideal for heavy loads at moderate speeds or light loads at high speeds
-
Alternative Part NumberAA-650-5
-
UNSPSC31171509
-
Package Description1/PK
-
Standards/ApprovalsROHS|REACH|DFARS Compliant|PROP65: This product can expose you to chemicals including polybrominated biphenyls which is known to the state of California to cause cancer and cadmium which is known to the state of California to cause birth defects or other reproductive harm. For more information go to www.P65WARNINGS.ca.gov
-
Catalog
-
Specification Sheet
Recently Viewed
ISOSTATIC™ Oilube® 101228 Round Bore Sleeve Bearing, 1/2 in Dia Bore, 11/16 in OD, 1-1/8 in W
Weiler® 10037 Circular Flared Stem Mount End Brush, 1-1/2 in Dia Brush, Crimped, 0.008 in Dia Filament/Wire, Steel Fill, 3/4 in L Trim
Weiler® 10037 Circular Flared Stem Mount End Brush, 1-1/2 in Dia Brush, Crimped, 0.008 in Dia Filament/Wire, Steel Fill, 3/4 in L Trim
8" X 2.50" BALL BEARING WHEELS-MATZP83GW33>
Brass shim is made from a half hard, cold rolled, 260 alloy brass. Precision Brand® is the only manufacturer to offer Branded® shim. It has everything the user needs to know clearly marked right on the shim: material type, material thickness and lot # for full traceability. Used in applications where corrosion problems exist, low magnetic permeability. Excellent forming qualities and may be lightly drawn, blanked or stamped. Precision Brand® shim stock is widely used in the following applications: tool and die set up, alignment, new machine assembly, machine repair and maintenance, mounting of motors, pumps and other machines, short run and prototype work, along with a variety of other industrial uses. It is especially useful for pilot production runs where material accuracy and economy are important. All Precision Brand® shim products are manufactured under rigorous quality control standards to assure high accuracy and tight tolerances.
C-3-GNY HOOKS WITH PIN-COV2183 >
ISOSTATIC™ Century® 104207 Round Bore Sleeve Bearing, 3/4 in Dia Bore, 7/8 in OD, 3/4 in W
