FED/Bronze 1-15/16"X2-7/16"X3" BRONZE BUSHING FEB CB-31-39-24
ISOSTATIC™ Century® 104833 Round Bore Sleeve Bearing, 1-15/16 in Dia Bore, 2-7/16 in OD, 3 in W
-
BrandISOSTATIC™
-
UPC846802021429
-
Manufacturer Part Number104833
-
CountryUSA
-
Temperature Rating-40 to 450 deg F
-
Maximum PV Rating75000 psi/sq-ft/min
-
Maximum Pressure3000 psi
-
Maximum Velocity750 sfpm
-
TypeRound Bore
-
Width3 in
-
Bearing MaterialSAE 660 Cast Bronze
-
Outside Diameter2-7/16 in
-
Bore Diameter1-15/16 in
- Standard stock products
- SAE 660/CA 932 copper 83%, tin 7%, lead 7% and zinc 3%
- Non-porous, highly dense grain structure for long life
- Offers good hardness, strength and wear resistance, excellent anti-frictional characteristics
- Tensile strength of 35000 psi, yield strength of 27000 psi and brinell hardness of 72
- Ideal for heavy loads at moderate speeds or light loads at high speeds
- Products made with excess material to finish to stated nominal dimensions
-
Alternative Part NumberCB-3139-24
-
UNSPSC31171509
-
Package Description1/PK
-
Standards/ApprovalsASTM B505|QOC-390B Type III B144-52-3B|REACH Compliant|PROP65: This product can expose you to chemicals including lead which is known to the state of California to cause birth defects or other reproductive harm. For more information go to www.P65WARNINGS.ca.gov
-
Specification Sheet
-
Catalog
Recently Viewed
FED/Bronze 1-15/16"X2-7/16"X3" BRONZE BUSHING FEB CB-31-39-24
ISOSTATIC™ Century® 104833 Round Bore Sleeve Bearing, 1-15/16 in Dia Bore, 2-7/16 in OD, 3 in W
Browning® 3546991 TGC Cam Detent Mini Straight Bushing Overload Clutch, 1/2 in Dia Bore, 3.15 in OD, 23 to 56 in-lb Torque, 2.36 in OAL
The Browning® Torq/Gard® overload clutches are one of the most popular torque overload devices that power transmission solutions offers. A spring loaded cam follower seated in a single hub cam detent cause the hub and clutch to rotate together. Therefore, the clutch always resets in the same position if tripped, staying in phase. They can be turned in both directions by design. After tripping, the unit automatically resets when it returns to the set position. This is usually performed by jogging the machine after the jam or overload is cleared. Shaft bushings are used to accommodate a standard maximum bore unit to the application shaft requirement. Torque capacity up to 8000 in-lb and speed ranges from 350 to 1800 rpm.
WALL MOUNTED STAINLESS STEEL BOWL EYEWASH STATION - SPKSE490>
60" WORKBENCH LOWER SHELFS
3/4" X 36" SMOOTH SHAFT ROD-NTL179820 >
ISOSTATIC™ Oilube® 401126 Round Bore Sleeve Bearing, 1/2 in Dia Bore, 5/8 in OD, 7/8 in W
