FED/Bronze 1-1/2" X 2" X 4" BRONZE BUSHINGS FEB CB-24-32-32
ISOSTATIC™ Century® 104710 Round Bore Sleeve Bearing, 1-1/2 in Dia Bore, 2 in OD, 4 in W
-
BrandISOSTATIC™
-
UPC846802020194
-
Manufacturer Part Number104710
-
CountryUSA
-
Temperature Rating-40 to 450 deg F
-
Maximum PV Rating75000 psi/sq-ft/min
-
Maximum Pressure3000 psi
-
Maximum Velocity750 sfpm
-
TypeRound Bore
-
Width4 in
-
Bearing MaterialSAE 660 Cast Bronze
-
Outside Diameter2 in
-
Bore Diameter1-1/2 in
- Standard stock products
- SAE 660/CA 932 copper 83%, tin 7%, lead 7% and zinc 3%
- Non-porous, highly dense grain structure for long life
- Offers good hardness, strength and wear resistance, excellent anti-frictional characteristics
- Tensile strength of 35000 psi, yield strength of 27000 psi and brinell hardness of 72
- Ideal for heavy loads at moderate speeds or light loads at high speeds
- Products made with excess material to finish to stated nominal dimensions
-
Alternative Part NumberCB-2432-32
-
UNSPSC31171509
-
Package Description1/PK
-
Standards/ApprovalsASTM B505|QOC-390B Type III B144-52-3B|REACH Compliant|PROP65: This product can expose you to chemicals including lead which is known to the state of California to cause birth defects or other reproductive harm. For more information go to www.P65WARNINGS.ca.gov
-
Catalog
-
Specification Sheet
Recently Viewed
ISOSTATIC™ Century® 104710 Round Bore Sleeve Bearing, 1-1/2 in Dia Bore, 2 in OD, 4 in W
1/2-CU/YD GRAY TILT TRUCKS-RBM1306 >
48" ROLLING MEASURING WHEEL - RLT400SG >
Dixon® 400-G-BU Cam and Groove Gasket, 4 in Nominal, 4 in ID x 4-7/8 in OD x 1/4 in THK, Buna-N, Domestic
Dixon® 400-G-BU Cam and Groove Gasket, 4 in Nominal, 4 in ID x 4-7/8 in OD x 1/4 in THK, Buna-N, Domestic
.015" X 12" FEELER GAUGE STRIPS-OHSFS015 >
50-LBS #6013-5/32" WELDING RODS E6013 mild steel "General Purpose" is an all-position, general-purpose rod with medium to shallow penetration. Medium to heavy slag is easily removed. Excellent for poorly fitted joints. Smaller sizes of rod are well suited to low heat on thin metals. Use on all types of mild steel where ease of operation and good appearance is required. Great for light gauge metal, sheet metal, duct work, etc.
