ISOSTATIC 1/2" X 3/4" X 1/2" BRONZE BUSHING FEB SF-16-24-8
ISOSTATIC™ Oilube® 402056 Round Bore Flange Bearing, 1/2 in Dia Bore, 3/4 in OD, 1/2 in W, 15/16 in Dia Flange
-
BrandISOSTATIC™
-
UPC846802049263
-
Manufacturer Part Number402056
-
CountryUSA
-
Temperature Rating10 to 175 deg F
-
Flange Diameter15/16 in
-
Maximum PV Rating50000 psi/sq-ft/min
-
Maximum Pressure2000 psi
-
Maximum Velocity1200 sfpm
-
TypeRound Bore
-
Width1/2 in
-
Bearing MaterialSAE 841 Powdered Metal/Oil Impregnated Bronze
-
Outside Diameter3/4 in
-
Bore Diameter1/2 in
- Standard stock products
- SAE 841 copper (87 to 90%), tin (8 to 9%), carbon and other elements
- Powdered metal bronze providing interconnected reservoirs for oil
- Vacuum impregnated with SAE 30 oil during the manufacturing process
- Self-lubricating, when in motion oil rises to the surface for lubrication and restores itself when at rest
- Ideal for heavy loads at moderate speeds or light loads at high speeds
-
Alternative Part NumberSF-1624-8
-
UNSPSC31171501
-
Package Description1/PK
-
Standards/ApprovalsROHS|REACH|DFARS Compliant|PROP65: This product can expose you to chemicals including polybrominated biphenyls which is known to the state of California to cause cancer and cadmium which is known to the state of California to cause birth defects or other reproductive harm. For more information go to www.P65WARNINGS.ca.gov
-
Specification Sheet
-
Catalog
Recently Viewed
ISOSTATIC™ Oilube® 402056 Round Bore Flange Bearing, 1/2 in Dia Bore, 3/4 in OD, 1/2 in W, 15/16 in Dia Flange
Campbell® T7645066 Spring Snap Link, 280 lb Load, 5/8 in Snap, 0.65 in Eye, 4.01 in OAL, Steel
Campbell® can trace its beginnings back to 1834, when one of the many companies that eventually became what is today the Campbell® brand began manufacturing harnesses for horses. Over the years, countless products were added, including wire rope and chain fittings, drop forged chain hardware, high quality tackle blocks, shackles, hooks and much more.
The Starrett 178 Series Fillet or Radius Inch Reading Gages are very useful for tool and diemakers, machinists, screw machine operators, patternmakers and other mechanics to lay out and check radii of tools, dies, patterns, and more. 34 Leaves, 1-7mm Range, 0.25mm/0.5mm increments.
1-1/2" -MALE PIPE THREAD METAL BLACK PLUG-FIT11/2BP >
The 94-2 LADDER-CINCH™ for use as a quick tie down. Strap designed for all diameter poles. One LADDER-CINCH™ assembly, storage bag and instructions are included.
BRASS SHIM STOCK-OHSCBS31 >
