Dodge® 042129 520 Both Ends Open Split Type SAF-XT Pillow Block Housing, Four-Bolt Base Mount, 4-1/2 in Base to Bore Centerline, 15-1/4 in OAL x 8-3/4 in OAH
The SAF-XT pillow block housing is designed for typical SAF dimensional interchangeability, complete with such desirable features as 4-bolt caps, cap removal pry slots, elongated bolt holes, and dimpled feet for doweling. In addition to these features the SAF-XT housing also incorporates a better grease purging/sealing system for extra protection of the bearing in a hostile environment.
-
BrandDodge®
-
UPC782475022533
-
Manufacturer Part Number042129
-
CountryUSA
-
FinishUncoated
-
MaterialCast Iron
-
TypeBoth Ends Open Split Type SAF-XT
-
Compatible Bearing Type22200K Adapter Mounted Bearing
-
Compatible Bore Diameter3-7/16 in, 3-1/2 in
-
Mounting TypeFour-Bolt Base
-
Series520
-
Base Width4.38 in
-
Base to Bore Centerline4-1/2 in
-
Bolt Center-to-Center Length12-3/4 in
-
Overall Height8-3/4 in
-
Overall Length15-1/4 in
-
Overall Width6.22 in
-
Alternative Part NumberH4S-SFXT-520
-
UNSPSC31171511
-
Specification Sheet
-
Catalog
-
Instruction/Installation Manual
Recently Viewed
Dodge® 042129 520 Both Ends Open Split Type SAF-XT Pillow Block Housing, Four-Bolt Base Mount, 4-1/2 in Base to Bore Centerline, 15-1/4 in OAL x 8-3/4 in OAH
The SAF-XT pillow block housing is designed for typical SAF dimensional interchangeability, complete with such desirable features as 4-bolt caps, cap removal pry slots, elongated bolt holes, and dimpled feet for doweling. In addition to these features the SAF-XT housing also incorporates a better grease purging/sealing system for extra protection of the bearing in a hostile environment.
Dixon® GL340 Standard Dry Gauge, 0 to 200 psi, 1/4 in Connection, 2-1/2 in Dial, +/- 3-2-3 %
Dixon® GL340 Standard Dry Gauge, 0 to 200 psi, 1/4 in Connection, 2-1/2 in Dial, +/- 3-2-3 %
Nice® 1620DCTNTG18 1600® Non-Fill Slot Precision Deep Groove Ball Bearing, 7/16 in Dia Bore, 1-3/8 in OD, 1 Rows, 7/16 in W, 850 lb Load
Precision ground 1600® Series bearings are specially designed to provide a line of low cost yet high quality bearings for adaptation to a majority of precision bearing applications. They are made in easy to use inch dimensions and are recommended for medium loads and for maximum speeds in the range of 5000 rpm. The 1600® Series bearings are precision ground on all surfaces with exceptional care given to the ball grooves. Careful heat treatment provides a uniform and exact degree of hardness for maximum life. A ball retainer, or separator, is used to increase the range of allowable speeds by reducing ball-to-ball contact friction.
NIBCO 205-011C Nipple, 1/2 in, Thread, 1/2 in Close L, CPVC, SCH 80/XH, Domestic
Nipple, 1/2 in, Thread, 1/2 in Close L, CPVC, SCH 80/XH, Domestic
4-1/2" X 7/8" 60-GRIT FLAP DISC-PEAMX4560ZT >
Leviton® 84028 Standard Size Traditional Wall Plate, 1 Gangs, 2-3/4 in W x 4-1/2 in H, 430 Stainless Steel
Familiar and functional, Leviton® traditional wallplates are designed for use with traditional Leviton® devices. They represent styles and form factors that have stood the test of time. Their clean lines work in virtually any location, whether in new or retrofit construction and they install quickly and easily. Leviton® offers traditional wallplates in a vast array of colors and configurations.
