Dodge® 131846 210 Normal Duty Pillow Block Ball Bearing Unit, 2 in Dia Bore, 6 to 6.68 in L Bolt Center-to-Center, 2.19 in Base to Bore Centerline, 8.12 in OAL x 4.47 in OAH
For more than 70 years, Dodge® has been talking to mounted bearing users and listening to their needs. This experience led to design of the optimum mounted ball bearings. The result is the Dodge® SXR line, the most current eccentric collar mounted ball bearing design on the market, provides the user unmatched quality and true total value.
-
BrandDodge®
-
UPC782475119554
-
Manufacturer Part Number131846
-
CountryUSA
-
Load Capacity7891 lb Dynamic/5213 lb Static
-
Locking DeviceEccentric Collar
-
Temperature Rating225 to 400 deg F
-
FinishPowder Coated
-
MaterialSteel
-
Maximum Speed4500 rpm
-
TypeNormal Duty
-
Mounting TypeTwo-Bolt Base
-
Seal TypeSingle Lip
-
Series210
-
Base Width2-1/4 in
-
Base to Bore Centerline2.19 in
-
Bolt Center-to-Center Length6 to 6.68 in
-
Bore Diameter2 in
-
Bore TypeRound
-
Expansion TypeNon-Expansion (Fixed)
-
Overall Height4.47 in
-
Overall Length8.12 in
-
Overall Width2-1/4 in
- Precision-hardened inner ring
- Normal duty wide inner ring
- Dodge® dual guard land-riding, positive contact seal
- Stronger and flexible ball cage
- Simplified anti-rotation device
- Low backing height pillow block
| Competitor Name | Competitor Part Number |
|---|---|
| Applied Industrial Technologies | 100940019 |
| Motion Industries | 00558390 |
-
Alternative Part NumberP2B-SXRB-200
-
UNSPSC31171504
-
Package DescriptionEACH
-
WarrantyLimited
-
Owners/User Manual
-
Catalog
-
Specification Sheet
-
Instruction/Installation Manual
-
Warranty Information
Recently Viewed
Dodge® 131846 210 Normal Duty Pillow Block Ball Bearing Unit, 2 in Dia Bore, 6 to 6.68 in L Bolt Center-to-Center, 2.19 in Base to Bore Centerline, 8.12 in OAL x 4.47 in OAH
For more than 70 years, Dodge® has been talking to mounted bearing users and listening to their needs. This experience led to design of the optimum mounted ball bearings. The result is the Dodge® SXR line, the most current eccentric collar mounted ball bearing design on the market, provides the user unmatched quality and true total value.
FYH® NAP204 12 NAP Normal Duty Pillow Block Unit, 3/4 in Dia Bore, 1-5/16 in Base to Bore Centerline, 5 in OAL 2-9/16 in OAH
FYH® NAP204 12 NAP Normal Duty Pillow Block Unit, 3/4 in Dia Bore, 1-5/16 in Base to Bore Centerline, 5 in OAL 2-9/16 in OAH
90- WATT 130 VOLT CLEAR HALOGEN BULB
Sealmaster® 700616 SP Series Standard-Duty Pillow Block Ball Bearing Unit, 1-15/16 in Dia Bore, 6-3/4 to 8-1/2 in L Bolt Center-to-Center, 2-3/4 in Base to Bore Centerline, 10-1/2 in OAL x 5-5/16 in OAH
Sealmaster® gold mounted ball bearings feature a wide outer race insert bearing with land riding metallic retainer. The black oxide treated bearing steel insert features an exclusive lock pin and dimple system providing a direct path for lubrication into the bearing, and prevents outer ring rotation within the housing. Shaft lock is achieved by either setscrew or Skwezloc® concentric locking collar. The felt seal with flinger provide a good balance between contaminant entry, GoldPlex® HP grease loss and friction. Depending on your preference, these bearings are available in both inch and metric shaft sizes with a wide variety of cast iron, stamped steel or rubber mount housings, sealing, and lubrication options or industry specific solutions.
Klein® D366-6C Fatigue Reducing Needle Nose Plier, Knurled Steel Jaw, 1-15/16 in L x 11/16 in W Jaw, 8 in OAL, 1/16 in W Tip
Klein® D366-6C Fatigue Reducing Needle Nose Plier, Knurled Steel Jaw, 1-15/16 in L x 11/16 in W Jaw, 8 in OAL, 1/16 in W Tip
Browning® Classical Gripbelt® 1042605 BK Series Type 3 Single Groove Sheave, Split Taper Bore, 3/8 to 1-1/2 in Dia Bore, 9-1/4 in OD, 8.7 in (A)/9.2 in (B) Dia Pitch, 7/8 in W Face
Browning® Classical Gripbelt® 1042605 BK Series Type 3 Single Groove Sheave, Split Taper Bore, 3/8 to 1-1/2 in Dia Bore, 9-1/4 in OD, 8.7 in (A)/9.2 in (B) Dia Pitch, 7/8 in W Face
