Dodge® 128478 210 Medium Duty Pillow Block Ball Bearing Unit, 1-11/16 in Dia Bore, 6 to 6.68 in L Bolt Center-to-Center, 2.31 in Base to Bore Centerline, 8.13 in OAL x 4.6 in OAH
For concentric grip on the shaft and less vibration at higher speeds, specify Dodge® D-LOK® normal- or medium-duty mounted ball bearings. These unique, concentric collar bearings are engineered with features that assure you superior holding power with improved concentricity. Even at high speeds, the D-LOK® bearing grips the shaft tighter and more uniformly for less vibration.
-
BrandDodge®
-
UPC782475890712
-
Manufacturer Part Number128478
-
CountryUSA
-
Load Capacity7891 lb Dynamic/5213 lb Static
-
Locking DeviceD-LOK® Concentric Clamp Collar
-
Temperature Rating225 to 400 deg F
-
FinishPowder Coated
-
MaterialSteel
-
Maximum Speed4500 rpm
-
TypeMedium Duty
-
Mounting TypeTwo-Bolt Base
-
Seal TypeSingle Lip
-
Series210
-
Base Width2-1/4 in
-
Base to Bore Centerline2.31 in
-
Bolt Center-to-Center Length6 to 6.68 in
-
Bore Diameter1-11/16 in
-
Bore TypeRound
-
Expansion TypeNon-Expansion (Fixed)
-
Overall Height4.6 in
-
Overall Length8.13 in
-
Overall Width2.01 in
- Precision-hardened and honed inner and outer rings
- New rugged housing design
- Normal duty wide inner ring
- D-LOK® locking mechanism
- Dual guard positive contact seal including rubberized flingers
- Stronger and flexible ball retainer
- Simplified anti-rotation device
- Electrostatically applied epoxy paint
| Competitor Name | Competitor Part Number |
|---|---|
| Applied Industrial Technologies | 100939623 |
| Motion Industries | 00599112 |
-
Alternative Part NumberP2B-DLMAH-111
-
UNSPSC31171504
-
Package DescriptionEACH
-
WarrantyLimited
-
Catalog
-
Warranty Information
-
Specification Sheet
-
Full Engineering Drawing
Recently Viewed
Dodge® 128478 210 Medium Duty Pillow Block Ball Bearing Unit, 1-11/16 in Dia Bore, 6 to 6.68 in L Bolt Center-to-Center, 2.31 in Base to Bore Centerline, 8.13 in OAL x 4.6 in OAH
For concentric grip on the shaft and less vibration at higher speeds, specify Dodge® D-LOK® normal- or medium-duty mounted ball bearings. These unique, concentric collar bearings are engineered with features that assure you superior holding power with improved concentricity. Even at high speeds, the D-LOK® bearing grips the shaft tighter and more uniformly for less vibration.
Sealmaster® 701861 MP Series Medium Duty Pillow Block Ball Bearing Unit, 1-1/4 in Dia Bore, 4-1/2 to 5-1/2 in L Bolt Center-to-Center, 1-7/8 in Base to Bore Centerline, 6-7/8 in OAL x 3-13/16 in OAH
Sealmaster® gold mounted ball bearings feature a wide outer race insert bearing with land riding metallic retainer. The black oxide treated bearing steel insert features an exclusive lock pin and dimple system providing a direct path for lubrication into the bearing, and prevents outer ring rotation within the housing. Shaft lock is achieved by either setscrew or Skwezloc® concentric locking collar. The felt seal with flinger provide a good balance between contaminant entry, GoldPlex® HP grease loss and friction. Depending on your preference, these bearings are available in both inch and metric shaft sizes with a wide variety of cast iron, stamped steel or rubber mount housings, sealing, and lubrication options or industry specific solutions.
Dodge® 126812 210 Medium Duty Pillow Block Ball Bearing Unit, 1-11/16 in Dia Bore, 6 to 6.68 in L Bolt Center-to-Center, 2-1/4 in Base to Bore Centerline, 8.12 in OAL x 4.53 in OAH
For over 70 years, Dodge® has been talking to mounted bearing users and listening to their needs. This experience lead to the design of the optimum mounted ball bearing. A state-of-the-art facility was built to manufacture the new Dodge® design. The result is the Dodge® SC/SCM/SL line. Its premium features make it the most reliable setscrew mounted ball bearing on the market and provides the user unmatched quality and true total value.
FYH® NAPK207 22 NAPK Normal Duty Pillow Block Unit, 1-3/8 in Dia Bore, 5 in L Bolt Center-to-Center, 1-13/16 in Base to Bore Centerline, 6-9/16 in OAL 3-5/8 in OAH
FYH® NAPK207 22 NAPK Normal Duty Pillow Block Unit, 1-3/8 in Dia Bore, 5 in L Bolt Center-to-Center, 1-13/16 in Base to Bore Centerline, 6-9/16 in OAL 3-5/8 in OAH
Milwaukee® 6065-6 Constant Speed Grounded Cord Electric Sander, 7 in, 9 in, 5000 rpm Speed
This 15 A, 5000 rpm, 3.5 maximum horsepower sander provides high performance under severe applications. As a sander, this tool can be used with a 7 or 9 in backing pad for removing paint or rust from metal, plastic and fiberglass surfaces. Spiral bevel gears transfer maximum torque for heavy duty jobs. Spring loaded recessed spindle lock assists in easy accessory changes. Sold as a sander, this tool can be converted to a grinder by purchasing a 7 or a 9 in guard which is easily attached to the tool. Grinding applications remove more material and may be used to shape metal.
Dodge® 126837 210 Medium Duty Pillow Block Ball Bearing Unit, 1-11/16 in Dia Bore, 6 to 6.68 in L Bolt Center-to-Center, 2-1/4 in Base to Bore Centerline, 8.12 in OAL x 4.53 in OAH
For over 70 years, Dodge® has been talking to mounted bearing users and listening to their needs. This experience lead to the design of the optimum mounted ball bearing. A state-of-the-art facility was built to manufacture the new Dodge® design. The result is the Dodge® SC/SCM/SL line. Its premium features make it the most reliable setscrew mounted ball bearing on the market and provides the user unmatched quality and true total value.
