FYH® UCP204 20MM UCP Normal Duty Pillow Block Unit, 20 mm Dia Bore, 3-3/4 in L Bolt Center-to-Center, 1-5/16 in Base to Bore Centerline, 5 in OAL 2-17/32 in OAH
FYH® UCP204 20MM UCP Normal Duty Pillow Block Unit, 20 mm Dia Bore, 3-3/4 in L Bolt Center-to-Center, 1-5/16 in Base to Bore Centerline, 5 in OAL 2-17/32 in OAH
-
BrandFYH®
-
Manufacturer Part NumberUCP204 20MM
-
CountryUSA
-
Load Capacity12.8 kN Dynamic/6.65 kN Static
-
Locking DeviceSet Screw
-
MaterialCast Iron
-
TypeNormal Duty
-
SeriesUCP
-
Base Width1-1/2 in
-
Base to Bore Centerline1-5/16 in
-
Bolt Center-to-Center Length3-3/4 in
-
Bore Diameter20 mm
-
Bore TypeCylindrical
-
Overall Height2-17/32 in
-
Overall Length5 in
-
Overall Width1-1/2 in
Recently Viewed
FYH® UCP204 20MM UCP Normal Duty Pillow Block Unit, 20 mm Dia Bore, 3-3/4 in L Bolt Center-to-Center, 1-5/16 in Base to Bore Centerline, 5 in OAL 2-17/32 in OAH
FYH® UCP204 20MM UCP Normal Duty Pillow Block Unit, 20 mm Dia Bore, 3-3/4 in L Bolt Center-to-Center, 1-5/16 in Base to Bore Centerline, 5 in OAL 2-17/32 in OAH
Browning® 1059377 Type H-2 Multiple Sheave, 0.38 to 1.5 in Split Taper Bore, 3.35 in OD, 3 Grooves, 3.3 in Dia Pitch, 1-1/2 in W Face
Browning® offers an extensive multi-groove sheave offering. This includes Browning® Split-Taper® and QD® bushing designs. This means maximum economy and versatility for your application. Truly the right drive every time our exclusive B5V® sheaves have a patented design that offers 5V horsepower in the economy of a B section sheave. B5V® sheaves serve 90% of all applications from 10 to 150 hp. This can reduce cost up to 40% over traditional designs.
Sealmaster® 702311 MPD Medium Duty Pillow Block Ball Bearing Unit, 2-11/16 in Dia Bore, 7-7/8 to 10-1/8 in L Bolt Center-to-Center, 3-1/2 in Base to Bore Centerline, 13 in OAL x 7 in OAH
Sealmaster® gold mounted ball bearings feature a wide outer race insert bearing with land riding metallic retainer. The black oxide treated bearing steel insert features an exclusive lock pin and dimple system providing a direct path for lubrication into the bearing, and prevents outer ring rotation within the housing. Shaft lock is achieved by either setscrew or Skwezloc® concentric locking collar. The felt seal with flinger provide a good balance between contaminant entry, GoldPlex® HP grease loss and friction. Depending on your preference, these bearings are available in both inch and metric shaft sizes with a wide variety of cast iron, stamped steel or rubber mount housings, sealing, and lubrication options or industry specific solutions.
JET® JT9-101920 S90 Light Duty Manual Chain Hoist, 1.5 ton Load, 10 ft H Lifting, 14-1/2 in Min Between Hooks, 1.9 in Hook Opening, 84 lb Rated
JET® S90 Series Hand Chain Hoists were designed with all steel construction and ensure reliability and durability to perform in light-duty industrial applications. Easily maintained and serviced, the JET® S90 is available in capacities from ½ ton to 10 ton and standard lifts of 10, 15, 20, and 30 feet (custom lifts available). The JET® S90 is the ideal contractor grade hoist.
FYH® NAPK206 20 NAPK Normal Duty Pillow Block Unit, 1-1/6 in Dia Bore, 4-3/4 in L Bolt Center-to-Center, 1-9/16 in Base to Bore Centerline, 6-5/16 in OAL 3-5/32 in OAH
FYH® NAPK206 20 NAPK Normal Duty Pillow Block Unit, 1-1/6 in Dia Bore, 4-3/4 in L Bolt Center-to-Center, 1-9/16 in Base to Bore Centerline, 6-5/16 in OAL 3-5/32 in OAH
FYH® NAPK206 19 NAPK Normal Duty Pillow Block Unit, 1-3/16 in Dia Bore, 4-3/4 in L Bolt Center-to-Center, 1-9/16 in Base to Bore Centerline, 6-5/16 in OAL 3-5/32 in OAH
FYH® NAPK206 19 NAPK Normal Duty Pillow Block Unit, 1-3/16 in Dia Bore, 4-3/4 in L Bolt Center-to-Center, 1-9/16 in Base to Bore Centerline, 6-5/16 in OAL 3-5/32 in OAH
