RBC Bearings 2"-OD CROWNED HEX CAM FOLLOWERS RBC C-S-64-LW
Needle Roller Cam Followers have a heavy outer ring cross section and a full complement of needle rollers. They offer high dynamic and static load carrying capability, and anti-friction performance, in a compact design. They are used as track rollers, cam followers, and in a wide range of linear motion systems.
-
BrandRBC®
-
UPC637400005115
-
Manufacturer Part NumberCS64LW
-
CountryUSA
-
Load Capacity9600 lb Dynamic/16700 lb Static
-
Temperature Rating250 deg F
-
FinishBlack Oxide
-
Thread Length1 in
-
Thread Size7/8-14 UNF-2A
-
Maximum Speed2200 rpm
-
Closure TypeSealed
-
TypeNeedle Roller
-
Roller Diameter2 in
-
Roller MaterialChrome Steel
-
Roller Width1-1/4 in
-
Head TypeHex
-
SeriesCS-LW
-
Stud Diameter7/8 in
-
Stud Length2 in
-
Stud MaterialChrome Steel
-
Stud TypeStandard
- Inventory reduction of about 50%
- Allows relubrication in tight spots or when stud access is limited
- HexLube® universal cam follower can eliminate the need to stock screwdriver slots or unsealed cam followers
- Standard stud cam followers offer the mounting convenience of a threaded stud and are designed to accommodate moderate loads
- Double sealed to keep grease in and contaminants out
-
UNSPSC31171530
-
Package Description1/PK
-
Standards/ApprovalsANSI/ABMA Standard 11|ASPR|CAS|DFAR|FAR Standards
-
Warranty90 Days
-
Catalog
Recently Viewed
Needle Roller Cam Followers have a heavy outer ring cross section and a full complement of needle rollers. They offer high dynamic and static load carrying capability, and anti-friction performance, in a compact design. They are used as track rollers, cam followers, and in a wide range of linear motion systems.
GULF BEARINGS MS-9 Deep Groove Ball Bearing, 1.125 in Dia Bore, 2.8125 in Dia Outside, 1 Rows, 0.8125 in W
CONS MS-11 Deep Groove Ball Bearing, 1.125 in Dia Bore, 2.8125 in Dia Outside, 1 Rows, 0.8125 in W
40-B-27-F1.3/16 27 Tooth Sprockets For #40 Chain-idc40b27f1.
27 TOOTH SPROCKETS FOR #40 CHAIN-IDC40B27F1.3/16 >
Morse® AV66 Master Cobalt® Heavy Duty Hole Saw, 4-1/8 in Dia, 1-1/2 in D Cutting, M3 HSS Cutting Edge
GP® 1032R Standard Length Socket, 3/8 in Drive, 1 in Socket, 6 Points
Poly Chain GT sprockets use the tooth profile designed and developed by Gates and function with Gates Poly Chain GT belts in all existing constructions. These sprockets are statically balanced to make sure the entire belt drive is as safe as possible. Furthermore, they are manufactured, specified, and tested to perfectly support the full power capabilities of the Gates Poly Chain belt product range. Belts and sprockets used together get the best out of your belt drive: maximum performance, prolonged antistatic properties and optimal lifetime.
