RBC Bearings 1-1/2"-OD CROWNED HEX CAM FOLLOWER RBC C-S-48-LW
Needle Roller Cam Followers have a heavy outer ring cross section and a full complement of needle rollers. They offer high dynamic and static load carrying capability, and anti-friction performance, in a compact design. They are used as track rollers, cam followers, and in a wide range of linear motion systems.
-
BrandRBC®
-
UPC637400004989
-
Manufacturer Part NumberCS48LW
-
CountryUSA
-
Load Capacity5000 lb Dynamic/8800 lb Static
-
Temperature Rating250 deg F
-
FinishBlack Oxide
-
Thread Length3/4 in
-
Thread Size5/8-18 UNF-2A
-
Maximum Speed3100 rpm
-
Closure TypeSealed
-
TypeNeedle Roller
-
Roller Diameter1-1/2 in
-
Roller MaterialChrome Steel
-
Roller Width7/8 in
-
Head TypeHex
-
SeriesCS-LW
-
Stud Diameter5/8 in
-
Stud Length1-1/2 in
-
Stud MaterialChrome Steel
-
Stud TypeStandard
- Inventory reduction of about 50%
- Allows relubrication in tight spots or when stud access is limited
- HexLube® universal cam follower can eliminate the need to stock screwdriver slots or unsealed cam followers
- Standard stud cam followers offer the mounting convenience of a threaded stud and are designed to accommodate moderate loads
- Double sealed to keep grease in and contaminants out
-
UNSPSC31171530
-
Package Description1/PK
-
Standards/ApprovalsANSI/ABMA Standard 11|ASPR|CAS|DFAR|FAR Standards
-
Warranty90 Days
-
Catalog
Recently Viewed
Needle Roller Cam Followers have a heavy outer ring cross section and a full complement of needle rollers. They offer high dynamic and static load carrying capability, and anti-friction performance, in a compact design. They are used as track rollers, cam followers, and in a wide range of linear motion systems.
1-1/4" X 120" EYE/EYE W/ROPE SLING-SWC8FAB12510 >
Browning® 1076793 QD Bushing, 1-13/16 in Dia Bore, 2-3/16 in Dia Barrel, 3-1/8 in Dia Flange, 1.83 in OAL, Ductile Iron
Browning® 1076793 QD Bushing, 1-13/16 in Dia Bore, 2-3/16 in Dia Barrel, 3-1/8 in Dia Flange, 1.83 in OAL, Ductile Iron
MORSE® 44252 4553 Center Cutting Double End Regular Length End Mill, 3/16 in Dia Cutter, 1/2 in Length of Cut, 4 Flutes, 3/8 in Dia Shank, 3-1/4 in OAL, Bright
Kuri Tec® SJMD300x100 SJMD Contractor Grade Mill Single Jacket Discharge Hose, 3.15 in Nominal, Hose End Style, 100 ft L, 150 psi Working, Rubber/Polyester, Import
Dodge® 130360 210 Normal Duty Pillow Block Ball Bearing Unit, 50 mm Dia Bore, 101.6 mm L Bolt Center-to-Center, 57.2 mm Base to Bore Centerline, 139.7 mm OAL x 117.6 mm OAH
A setscrew shaft attachment method is the most common means of securing a mounted ball bearing to a shaft and also the easiest to install. The Dodge® mounted ball bearing offering is engineered with a 65 deg setscrew angle. This ensures the maximum grip onto the shaft, especially when using premium cup point set screws with the high quality manufacturing of the Dodge® insert.
