Smith Bearing® CR-3/4-XBE Cylindrical Stud Type Needle Bearing Cam Follower With Eccentric Bushing, 3/4 in Dia x 1/2 in W Roller, 1/2 in Dia x 7/8 in L Stud, 52100 Steel Roller
A press fit eccentric sleeve provides correct alignment and adjustment without costly preparation of close tolerance mounting holes and members. Eliminate problems of clearances, preloading and wear compensation and assure load sharing in multiple cam follower applications. Offer two model are non-crowned outer race and crowned outer race.
-
BrandSmith Bearing®
-
UPC651041140844
-
Manufacturer Part NumberCR-3/4-XBE
-
CountryUSA
-
Load Capacity2140 lb Dynamic
-
Thread Length3/8 in
-
Thread Size3/8-24 UNF
-
Closure TypeSealed
-
TypeCylindrical Stud Type
-
Roller Diameter3/4 in
-
Roller Material52100 Steel
-
Roller Width1/2 in
-
Head TypeHex Socket
-
SeriesCR-XBE
-
Stud Diameter1/2 in
-
Stud Length7/8 in
-
Stud MaterialCarbon Steel
| Competitor Name | Cross-Reference Number |
|---|---|
| Grainger | 13W749 |
-
UNSPSC31171530
-
Warranty12 months
-
Catalog
-
Full Engineering Drawing
Recently Viewed
Smith Bearing® CR-3/4-XBE Cylindrical Stud Type Needle Bearing Cam Follower With Eccentric Bushing, 3/4 in Dia x 1/2 in W Roller, 1/2 in Dia x 7/8 in L Stud, 52100 Steel Roller
A press fit eccentric sleeve provides correct alignment and adjustment without costly preparation of close tolerance mounting holes and members. Eliminate problems of clearances, preloading and wear compensation and assure load sharing in multiple cam follower applications. Offer two model are non-crowned outer race and crowned outer race.
Gates® Power Transmission Hi-Power® II BB96 Banded Heavy Duty Double V-Belt, BB Section, 21/32 in W Top, 99 in L Outside, 17/32 in THK, EPDM
Designed with a unique recessed top and bottom to maintain sidewall contact, while remaining flexible for belt drive applications that require power transmission from both sides of the belt.
TRAKROL® bearings feature black oxide treated bearing steel. They utilize either a precision ball or tapered roller bearing insert for longer operating life under combination radial and thrust loads. The capacity for combination loads allows the TRAKROL® bearing to be available in plain (cylindrical), V-groove and flanged outside diameter in both stud and yoke styles. Small sizes less than 3 in outside diameter or point diameter use sealed ball bearing inserts. They also use a NYLAPLATE® seal for additional protection. Stud type configurations utilize a metal end plug seal on the roller face providing a long lasting seal. Both bearing types provide a large internal grease reservoir along with special sealing. This makes TRAKROL® bearings an excellent choice where reduced maintenance is required.
