NACHI 6301ZZENR 6300 Deep Groove Ball Bearing, 12 mm Dia Bore, 37 mm OD, 1 Rows, 12 mm W, 9750 N Dynamic/4250 N Static Load
Single-row deep groove ball bearings are the most common bearing type in the world due to their versatility and performance. These bearings are available in a variety of seal, shield and snap-ring arrangements. Bearings with seals or shields are standardized and already contain the proper amount of grease. Open bearings will require lubrication. These bearings can sustain radial and/or axial loads and because of their simple design, this bearing type can be produced to provide both high-running accuracy and high-speed operation.
-
BrandNACHI
-
Manufacturer Part Number6301ZZENR
-
CountryUSA
-
Load Capacity9750 N Dynamic/4250 N Static
-
Cage MaterialStamped Steel
-
Temperature Rating250 deg F
-
Maximum Speed20000 rpm Grease/24000 rpm Oil
-
Closure TypeDouble Shield
-
Width12 mm
-
Series6300
-
Number of Rows1
-
Bearing MaterialSteel
-
Outside Diameter37 mm
-
Bore Diameter12 mm
- Excellent high speed capability
- Good radial load capacity
- Good axial load capacity in both directions
- Low torque requirements during startup and operation
- Low noise
- Little/no maintenance required
- Longer life - adopted NACHI original seal design to prevent contamination and grease leakage, contains special grease for wider temperature ranges and longer life
- Smooth and quiet operation - the precision level of our bearing components has been enhanced to ensure smooth and quiet operation
- Snap ring and groove
-
UNSPSC31171504
-
Package DescriptionEACH
-
Owners/User Manual
-
Catalog
Recently Viewed
NACHI 6301ZZENR 6300 Deep Groove Ball Bearing, 12 mm Dia Bore, 37 mm OD, 1 Rows, 12 mm W, 9750 N Dynamic/4250 N Static Load
Single-row deep groove ball bearings are the most common bearing type in the world due to their versatility and performance. These bearings are available in a variety of seal, shield and snap-ring arrangements. Bearings with seals or shields are standardized and already contain the proper amount of grease. Open bearings will require lubrication. These bearings can sustain radial and/or axial loads and because of their simple design, this bearing type can be produced to provide both high-running accuracy and high-speed operation.
Chicago Pneumatic CP-9429 Ratchet Wrench, 3/8 in Drive, 70 N-m Torque, 150 rpm Speed, 15 cfm Air Flow, 90 psi
The CP828 series pneumatic ratchet wrench is designed for general maintenance with its torque of 50 ft.lbs / 70 Nm. The CP828 Series is composed of 2 models: 3/8 Inch and 1/2 Inch anvil.
Coilhose® YB40504Y Yellow Belly™ Straight Hybrid Hose, 1/4 in, 1/4 in MPT Rigid, 50 ft L, 300 psi, Hybrid PVC, Import
Coilhose® YB40504Y Yellow Belly™ Straight Hybrid Hose, 1/4 in, 1/4 in MPT Rigid, 50 ft L, 300 psi, Hybrid PVC, Import
CAM FOLLOWERS-SMIYR11/4X>
3/4" 45-DEGREE BLACK STREET ELBOW-JPW3/4B45STE >
Dixon® 3790806C Reducing Hex Nipple, 1/2 x 3/8 in x 1-5/8 in L, Brass, MNPT, Domestic
Dixon® 3790806C Reducing Hex Nipple, 1/2 x 3/8 in x 1-5/8 in L, Brass, MNPT, Domestic
