Battery Chargers
Streamlight® 22051 Auto Charger Cord, 10 min Charging, For Use With Rechargeable Flashlights
Streamlight® 22051 Auto Charger Cord, 10 min Charging, For Use With Rechargeable Flashlights
Streamlight® 22010 USB Charger Kit, 2600 mAh Li-Ion Battery, 3-1/2 hr Single Bay, 3-1/2 hr Left Bay Priority, 6-1/2 hr Right Bay Charging, 2 Batteries
The 18650 Charger Kit comes with (2) Streamlight® 18650 USB batteries, one USB cord, and 2-bay charging cradle. These batteries can be recharged using the micro USB port in the battery (with a cord) or via the charging cradle.
Milwaukee® 48-59-1809 Rapid Charger, Li-Ion Battery, (2) Batteries, For Use With Li-Ion Batteries
With its fast charging and PACKOUT™ compatibility, the MILWAUKEE® M18™ Six Bay Rapid Charger delivers users reduced downtime and unmatched portability when charging. The Six Bay RAPID Charger simultaneously charges two batteries at a rapid charge rate, then automatically moves to the next two so you spend less time swapping batteries on the jobsite. The rapid charge rate is up to 40% faster than Milwaukee's standard rate chargers, reducing battery downtime. This battery charger is optimized for transportation and storage on and off the jobsite. Integrate this charger into your PACKOUT™ modular storage system, and experience unmatched charging portability. Bring this charger with you, either on your PACKOUT™ stack or by utilizing the convenient carrying handle. The Milwaukee® M18™ Six Bay Rapid Charger w/ PACKOUT™ Compatibility includes (1) USB-C port, allowing users to charge small personal electronics such as phones, tablets, and headlights. During charging, store your personal electronics on either side of the charger with storage caddies. The M18™ Six Bay Rapid Charger w/ PACKOUT™ Compatibility is great for users managing multiple M18™ battery packs throughout their day.
Energizer® Recharge® CHVCMWB-4 Value Charger, 1300 mAh Alkaline Battery, 5 hr Charging, 4 Batteries
Keep the power you need at hand with the convenience of Energizer Recharge Value Charger. This handy device charges 2 or 4 AA or AAA NiMH batteries in 5 hours.* And it’s easy to use: Load up the device, plug into the wall, and get fully loaded battery power when you need it. The charger’s indicator screen glows green when you have a full charge. Should you insert a bad or primary battery, the screen pulses to notify you. Perfect for those most used devices like remotes, computer mouses, and even gaming controllers… So maximize battery performance with the charging power of Energizer, the world’s #1 recharge brand (according to market survey data). Specs at a Glance: • 2 or 4 AA or AAA NiMH batteries • Comes with four (4) 1300 mAh 1.2V AA Energizer Recharge Batteries • Large LED Charge Status Indicator Screen (red glow = charging, green glow = complete) • Bad & Primary Battery Detection (screen flashes when detected) • Reverse Polarity Protection • Delta V Charging Cut-off • Safety Timer to prevent overcharge • Limited Lifetime Warranty (see manual for details) * Times may vary by NiMH battery.
Alemite® 340913 Battery Charger, 1 hr Charging, For Use With Alemite® Cordless Grease Guns
Alemite® 340913 Battery Charger, 1 hr Charging, For Use With Alemite® Cordless Grease Guns
Recently Viewed
PIX A-13 IS A CLASSICAL V-BELT 15" OUTSIDE LENGTH, 1/2" TOP WIDTH, 5/16" THICKNESS, 1 RIB
OIL RESISTANT, ANTISTATIC, MAXIMUM BELT LINEAR SPEED UP TO 30M/SEC, INDUSTRIAL BELT TYPE, PRIMARILY USED AS REPLACEMENT ON INDUSTRIAL DRIVES. THE CLASSICAL BELTS ARE RECOMMENDED IN SPECIAL APPLICATIONS SUCH V-FLAT DRIVES
-PIXA13 >
THESE BELTS FOLLOW A CLASSICAL V-BELT PROFILE, WHICH ENSURES COMPATIBILITY WITH A VARIETY OF STANDARD PULLEY SYSTEMS. THE WRAPPED CONSTRUCTION PRVIDES ENHANCED PROTECTION AGAINST ENVIRONMENTAL FACTORS. THEY ARE MADE OF RUBBER COMPOUNDS AND STRONG TENSION MEMBERS. THEY ARE RESISTANT TO HEAT AND OIL AND STATIC.
- PIXC162>
8" -IDX8-3/16" -OD O-RING
PIX A-121 IS A CLASSICAL V-BELT,123" OUTSIDE LENGTH, 1/2" TOP WIDTH, 5/16" THICKNESS, 1 RIB
OIL RESISTANT, ANTISTATIC, MAXIMUM BELT LINEAR SPEED UP TO 30M/SEC, INDUSTRIAL BELT TYPE, PRIMARILY USED AS REPLACEMENT ON INDUSTRIAL DRIVES. THE CLASSICAL BELTS ARE RECOMMENDED IN SPECIAL APPLICATIONS SUCH V-FLAT DRIVES
-PIXA121 >
PIX B-122 IS A CLASSICAL V-BELT, 125" OUTSIDE LENGTH, 5/8" TOP WIDTH, 13/32" THICKNESS, 1 RIB
PRECISE FIT, DURABLE POLYESTER CONSTRUCTION, VERSATILE APPLICATIONS, RESISTANT TO WEAR AND STRETCH, IMPROVES EQUIPMENT EFFICIENCY.
-PIXB122 >
Milwaukee® 2836-21 M18™ FUEL™ Electric Cordless Oscillating Multi-Tool Kit, 10000 to 20000 opm Speed, 18 V, Li-Ion Battery, 1 Batteries, Yes
The MILWAUKEE® M18 FUEL™ Oscillating Multi-Tool Kit generates the fastest cuts, the power for demolition, and the lowest full tool vibration. The POWERSTATE™ Brushless Motor delivers 10,000 to 20,000 OPM with an aggressive 4.2-degree oscillation angle to deliver the fastest cuts over the competition. The cordless multi-tool also delivers the power to complete many demanding applications with ease, such as large cuts through hardwoods and nail embedded wood, pushing the limits of what a multipurpose oscillating tool can do. Vibration dampening technology delivers the lowest full tool vibration, making cuts more comfortably with less fatigue. REDLINK PLUS™ Intelligence achieves unmatched levels of performance, protection, and compatibility. The M18™ REDLITHIUM™ XC5.0 battery delivers more work per charge than competitive batteries on the market when used with the multitool. The M18 FUEL™ Oscillating Multi-Tool has a 10-Setting Dial with an additional Auto-Load Feature, allowing users to adjust the speed to the application. An integrated 180-degree LED light provides maximum visibility in low-light situations.