Duracell® PC2400 Cylindrical Battery, Zinc-Manganese Dioxide, 1.5 VDC, 1175 mAh, AAA
Duracell® PC2400 Cylindrical Battery, Zinc-Manganese Dioxide, 1.5 VDC, 1175 mAh, AAA
-
BrandDuracell®
-
UPC041333524405
-
Manufacturer Part NumberPC2400
-
CountryUSA
-
Terminal TypeButton Top
-
Chemical SystemZinc-Manganese Dioxide
-
Nominal Capacity1175 mAh
-
Nominal Voltage1.5 VDC
-
Shelf Life6 to 8 years
-
Battery SizeAAA
-
Dimensions44.5 mm H x 10.5 mm W x 44.5 mm D
-
Discharge Cut-Off Voltage1.5 VDC
-
Internal Impedance250 mOhm
-
Life Hour5 hr
- 3.500 cu-cm volume
- 1.5 V at 5.1 Ohm, 5 hr, 21 deg C discharge cut-off voltage
-
UNSPSC26111702
-
Specification Sheet
Recently Viewed
Duracell® PC2400 Cylindrical Battery, Zinc-Manganese Dioxide, 1.5 VDC, 1175 mAh, AAA
Duracell® PC2400 Cylindrical Battery, Zinc-Manganese Dioxide, 1.5 VDC, 1175 mAh, AAA
Browning® VER bearings feature black oxide treated inner and outer rings and extended inner race bearing with ball riding nylon retainer. Shaft lock is achieved by 120 deg spaced diamond faceted setscrew locking. The contact seal, with black oxide treated flinger provides a good balance between contaminant resistance, grease loss and friction.
36" HANDLE MAGNETIC PICK-UP TOOLS-JWH351814>
HCI Preferred Supplier 540546 Adapter, 1/4 x 3/8 in Nominal, MPT x FPT End Style, Steel
HCI Preferred Supplier 540546 Adapter, 1/4 x 3/8 in Nominal, MPT x FPT End Style, Steel
Milwaukee® 49-59-2175 Annular Cutter, 1-3/4 in Dia Cutter, 2 in D Cutting, HSS, Oxide Treated, Weldon Shank
Milwaukee high speed steel annular cutters offer a thin-wall construction with an advanced tooth geometry that cuts and cleans while drilling, leading to faster holes and longer life. The cutters displace less material for the same size hole as the competition, giving you fast, burr-free holes in anything from sheet metal to thick plate steel. All Milwaukee high speed steel annular cutters have a 3/4 in. Weldon shank for use with most small magnetic drill presses and large magnetic drill presses with the correct arbor.
1-GRV A OR B-BELT 3/4"-ID SHEAVES IDC BK-055-7/8
1-GROOVE A OR B-BELT 7/8"-ID SHEAVE
