Loctite® SUPERFLEX® 193999 SI 595™ 1-Part RTV Adhesive Sealant, 300 mL Cartridge
Loctite® SUPERFLEX® 193999 SI 595™ 1-Part RTV Adhesive Sealant, 300 mL Cartridge
-
BrandLoctite®
-
UPC079340595750
-
Manufacturer Part Number193999
-
CountryUSA|Canada
-
Temperature Rating-65 to 450 deg F
-
Chemical TypeSilicone
-
ColorTranslucent
-
Type1-Part
-
VOC Content30 g/L
-
Container Size300 mL
-
Container TypeCartridge
-
SeriesSI 595™
-
Curing Time24 hr
-
Specific Gravity1.01
-
Drying Time10 min
- Loctite® SI 595™ clear RTV silicone adhesive sealant is a general purpose, one-part silicone adhesive sealant cures at room temperature to form a tough rubber seal
- Will not slump in overhead or vertical applications
- Formulated to withstand extreme temperature cycling, UV light and ozone
| Competitor Name | Competitor Part Number |
|---|---|
| Grainger | 3KMY8 |
| Grainger | 3KMY8 |
| Grainger | 3KMY8 |
-
Alternative Part Number59575
-
UNSPSC31201700
-
Package Description1/PK
-
Standards/ApprovalsCFIA Approved|UL Listed|cULus Listed|NSF/ANSI 51|OSHA 29 CFR 1910.1200|CSA Approved
Recently Viewed
Loctite® SUPERFLEX® 193999 SI 595™ 1-Part RTV Adhesive Sealant, 300 mL Cartridge
Loctite® SUPERFLEX® 193999 SI 595™ 1-Part RTV Adhesive Sealant, 300 mL Cartridge
Legris by Dixon® 32756218 Push-In Connector, 3/8 x 1/2 in Nominal, MNPT x Tube, 290 psi Pressure, Brass, Domestic
Legris by Dixon® 32756218 Push-In Connector, 3/8 x 1/2 in Nominal, MNPT x Tube, 290 psi Pressure, Brass, Domestic
Many accessories accompany the Browning® shaft mount reducer. These accessories are designed to provide installation flexibility, improved performance and safety.
2-3/4x.014x5/8-11 Stainless Steel Small Cup Brush KNOT Wire, 6 pack
Interleaf flap wheels are constructed with alternating flaps of surface conditioning material and coated abrasives material for a high cut rate and a uniform scratch pattern
Provides blending action while leaving final finish on work piece
Smear-resistant non-woven material for clean, smear-proof work surfaces
Interleaf design makes product more aggressive than SAIT non-woven flap brushes and less aggressive than SAIT coated abrasive flap wheels
Available in two grades: Medium and Very Fine
Medium (General Purpose): Excellent for removing heavy oxidation, blending, cleaning, and deburring. Medium surface conditioning material with either 60 or 80 grit coated abrasive material
Very Fine: Excellent for grain finishing, satin finishing, and linear scratch patterns. Very Fine surface conditioning material with either 120 or 180 grit coated abrasive material
DOUBLE LOCK COUPLING FPT 3/4"-DXNPF12>
