Elmer's® Glue-All® Max E9406 Paintable Stainable All Purpose Glue, 2 fl-oz Bottle, Liquid, Brown, 1.12 at 20 deg C
The ultimate adhesive adheres anything to anything with a permanent, strong, waterproof bond. Requires no mixing and is sandable, paintable and stainable. Best on stone, metal, ceramic, wood, foam, glass and more, Clean up mineral spirits or acetone when glue is wet, sand and scrape when glue is dry. Yellow color when dry.
-
BrandElmer's®
-
UPC026000940603
-
Manufacturer Part NumberE9406
-
CountryUSA
-
Flash Point230 deg F
-
FormLiquid
-
ColorBrown
-
TypePaintable Stainable
-
CompositionIsocyanic Acid, Polymethylenepolyphenylene Ester, 4,4-Methylenediphenyl Diisocyanate, Chlorobenzene
-
VOC Content12 g/L
-
Viscosity Rating2311 cPs
-
Container Size2 fl-oz
-
Container TypeBottle
-
Applicable MaterialsCeramic Fabric, Foam, Glass, Metal, Plastic, Stone and Wood
-
Base TypePolyurethane
-
Specific Gravity1.12 at 20 deg C
-
Odor/ScentMusty
- 30 min before clamping open time
- 12 hr clamp time
-
UNSPSC31201603
-
Standards/ApprovalsOSHA 29 CFR 1910.1200
-
SDS
Recently Viewed
The ultimate adhesive adheres anything to anything with a permanent, strong, waterproof bond. Requires no mixing and is sandable, paintable and stainable. Best on stone, metal, ceramic, wood, foam, glass and more, Clean up mineral spirits or acetone when glue is wet, sand and scrape when glue is dry. Yellow color when dry.
3/32" X 5/8" WOODRUFF KEY-MED1004 >
Smith Bearing® HR-1/2-XB Cylindrical Stud Type Needle Bearing Cam Follower, 1/2 in Dia x 3/8 in W Roller, 1/4 in Dia x 5/8 in L Stud, 52100 Steel Roller
The HR Series have a larger diameter stud and are recommended for applications with high running loads and/or heavy shocks where deflection should be held to a minimum. Rollers and outer races are identical to the standard CR Series. Manufactured from high alloy bearing quality steel.
8 THHN WHITE ELECTRICAL WIRE 500' ROLL - ALE8THHNWHT >
7-LB PAIL DAMTITE WATERPROOFERS-DAM01071>
Sealmaster 3-3/16"-ID M/D 300 BB PILLOW BLOCK SEA MP-51-C-CR
Sealmaster® gold mounted ball bearings feature a wide outer race insert bearing with land riding metallic retainer. The black oxide treated bearing steel insert features an exclusive lock pin and dimple system providing a direct path for lubrication into the bearing, and prevents outer ring rotation within the housing. Shaft lock is achieved by either setscrew or Skwezloc® concentric locking collar. The felt seal with flinger provide a good balance between contaminant entry, GoldPlex® HP grease loss and friction. Depending on your preference, these bearings are available in both inch and metric shaft sizes with a wide variety of cast iron, stamped steel or rubber mount housings, sealing, and lubrication options or industry specific solutions.
