Rust-Oleum 3.5-GAL TURBOKRETE CONCRETE PATCH RUS 5494-323
TurboKreteĀ® Concrete Patching Compound is a resin rich epoxy/aggregate patching compound designed for quick patch repair of concrete floors in areas exposed to intermittent chemical exposure and physical abuse. TurboKrete Concrete Patching Compound is designed for patching repairs to concrete floors when down time is critical. It is a stand-alone material which does not require a sealer for exposure to moderate chemical spills. It can be applied in a single step application with hand trowel finishing. The 100% solids epoxy is odorless making it ideal for food and beverage plants or other facilities where solvent odors cannot be tolerated. This product complies with USDA FSIS regulatory sanitation performance standards for food establishment facilities. This coating is impervious to moisture and easily cleaned and sanitized.
-
BrandRust-OleumĀ®
-
UPC020066549435
-
Manufacturer Part Number5494323
-
CountryUSA
-
Temperature Rating45 to 90 deg F
-
Flash PointPart A: 94 deg C/Part B: 94 deg C/Part C: 537 deg C
-
ColorLight Gray
-
Type3-Component
-
VOC Content<115 g/L
-
Container Size3.5 gal
-
Container TypePail
-
Applicable MaterialsConcrete
-
Coverage0.3 cu-ft
-
Series5494 System
-
Curing Time72 hr
-
Drying Time2 to 4 hr
- Protects against abrasion, impact and most chemicals no sealer required
- Creates an extremely hard surface, 3 to 4 times stronger than concrete
- Dries quickly, can accept light traffic in 1.5 to 4 hrs, heavy traffic in 6 to 8 hrs
- Easy-mix kit includes base, activator and aggregate
- Odorless
- Polyamine epoxy resin
- Wet the trowel blade with 160 thinner to help ease final finishing
- Part A: base, part B: activator, part C: aggregate
- 2 years shelf life
- 2-1/2 to 4 hrs foot traffic dry time, 2 to 4 hrs topcoat dry time, 6 to 8 vehicle traffic dry time, 3 days full chemical exposure dry time
-
UNSPSC30111509
-
Package Description1/PK
-
Standards/ApprovalsASTM C579/C580
-
Specification Sheet
-
SDS
Recently Viewed
TurboKreteĀ® Concrete Patching Compound is a resin rich epoxy/aggregate patching compound designed for quick patch repair of concrete floors in areas exposed to intermittent chemical exposure and physical abuse. TurboKrete Concrete Patching Compound is designed for patching repairs to concrete floors when down time is critical. It is a stand-alone material which does not require a sealer for exposure to moderate chemical spills. It can be applied in a single step application with hand trowel finishing. The 100% solids epoxy is odorless making it ideal for food and beverage plants or other facilities where solvent odors cannot be tolerated. This product complies with USDA FSIS regulatory sanitation performance standards for food establishment facilities. This coating is impervious to moisture and easily cleaned and sanitized.
BrowningĀ® 767632 VPLS 200 Normal Duty Pillow Block Ball Bearing, 1/2 in Dia Bore, 3-3/16 to 4-1/16 in L Bolt Center-to-Center, 1-1/16 in Base to Bore Centerline, 4-7/8 in OAL x 2-3/32 in OAH
BrowningĀ® mounted ball bearings feature multiple housing styles, materials and configurations, an extended inner race insert bearing with ball riding nylon retainer. The insert features a rivet to prevent outer ring rotation and is available with setscrew, eccentric, or BOA concentric locking collar. The contact seal, with black oxide treated flinger provides a good balance between contaminant resistance, grease loss and friction. Depending on your preference, these bearings are available in inch and metric bore with a wide variety of cast iron, stamped steel or rubber mount housings or specific industry solutions as illustrated on the pages to follow.
BrowningĀ® 767747 VPS 100 Intermediate Duty Pillow Block Ball Bearing, 1-1/4 in Dia Bore, 4-3/8 to 5-1/16 in L Bolt Center-to-Center, 1-11/16 in Base to Bore Centerline, 5-15/16 in OAL x 3-5/32 in OAH
BrowningĀ® mounted ball bearings feature multiple housing styles, materials and configurations, an extended inner race insert bearing with ball riding nylon retainer. The insert features a rivet to prevent outer ring rotation and is available with setscrew, eccentric, or BOA concentric locking collar. The contact seal, with black oxide treated flinger provides a good balance between contaminant resistance, grease loss and friction. Depending on your preference, these bearings are available in inch and metric bore with a wide variety of cast iron, stamped steel or rubber mount housings or specific industry solutions as illustrated on the pages to follow.
GreenleeĀ® 925-1-7/32 925 Ultra Hole Saw With Fixed Pockets, 1-7/32 in Dia, 1/4 in D Cutting, HSS Cutting Edge, 3/8 in Arbor
GreenleeĀ® 925-1-7/32 925 Ultra Hole Saw With Fixed Pockets, 1-7/32 in Dia, 1/4 in D Cutting, HSS Cutting Edge, 3/8 in Arbor
GreenleeĀ® 925-1-3/8 Ultra Hole Saw With Fixed Pockets, 1-3/8 in Dia, 1/4 in D Cutting, HSS Cutting Edge, 1/2 in Arbor
GreenleeĀ® 925-1-3/8 Ultra Hole Saw With Fixed Pockets, 1-3/8 in Dia, 1/4 in D Cutting, HSS Cutting Edge, 1/2 in Arbor
MorseĀ® 116329 MHSA Advanced Hole Saw With Arbor, 2 in Dia, 1-15/16 in D Cutting, M42 HSS-Co 8 Cutting Edge, 5/8-18 Arbor
Morse, MHSA32C (116329), 2" (51mm) diameter, arbored, bimetal hole saw is designed for general purpose use, cutting a wide range of materials including stainless steel, machinable metals, wood and plastic. Aggressive, positive rake tooth profile penetrates material easier and faster. Unique side slot increases leaverage access for various thicknesses of materials, easing slug removal. One (1) hole saw per card. To optimize performance consider using Morse CUTLUBE (121408).
