Touch 'N Foam® Fire Break® 4004501212 Flame Resistant Foam Sealant, 12 oz Can, Aerosal Spray Form, Red
Other fire block foams are available, but they merely meet minimum testing standards. Touch 'n Foam® Fire Break® is a flame resistant all purpose, class A fire retardant foam sealant that exceeds testing standards. Fire break is self-extinguishing and works by eliminating oxygen flow in service penetrations, where fire spreads most quickly. Using Fire Break® in these penetrations blocks air infiltration, which means fire will take longer to burn through to adjoining rooms, giving you valuable time to get to safety.
-
BrandTouch 'N Foam®
-
UPC075650100127
-
Manufacturer Part Number4004501212
-
CountryUSA
-
FormAerosal Spray
-
ColorRed
-
TypeFlame Resistant
-
VOC Content163 g/L
-
Container Size12 oz
-
Container TypeCan
-
Coverage409 linear-ft at 3/8 in Bead
-
Curing Time<4 hr
-
Odor/ScentWeak/Characteristic
-
Drying Time<30 min
- Approved fire block penetration sealant
- Fills and seals service penetrations
- Class A fire resistant
-
UNSPSC31201704
-
Package Description12/PK
-
Standards/ApprovalsOSHA 29 CFR 1910.1200|UL Listed|ASTM Standards|UL 1715|UL 94 V-O
-
SDS
-
Catalog
-
Specification Sheet
Recently Viewed
Touch 'N Foam® Fire Break® 4004501212 Flame Resistant Foam Sealant, 12 oz Can, Aerosal Spray Form, Red
Other fire block foams are available, but they merely meet minimum testing standards. Touch 'n Foam® Fire Break® is a flame resistant all purpose, class A fire retardant foam sealant that exceeds testing standards. Fire break is self-extinguishing and works by eliminating oxygen flow in service penetrations, where fire spreads most quickly. Using Fire Break® in these penetrations blocks air infiltration, which means fire will take longer to burn through to adjoining rooms, giving you valuable time to get to safety.
System Plast™ VG-018-02 018 Heavy Duty Rail Clip
Remke Tuff-Seal™ 7303-003R Non-Insulated Wide Range Strain Relief Grip With Mesh, 1/2 in Trade, 0.4 to 0.54 in Cable Openings, Aluminum
Tuff-Seal™ strain relief grips are used to connect cord or cable to electrical enclosures and equipment, power boxes, portable power tools, panel boards and machine tools. For indoor use only in dry locations, these grips help control arc-of-bend and prevent cable pull-out and damage resulting from flexing. Strain is distributed over the length of these grips instead of at a single point. These tuff seal strain relief grips are made with a single-weave, galvanized steel mesh and feature aluminum fittings and a gasket that provides an environmental seal against dust, filings and other foreign material.
Alemite® 317400 Straight Top Vent Pressure Relief Fitting, 1/8 in PTF SAE Special Short Thread, 1/2 in OAL, 7/16 in L Shank, Carbon Steel, Zinc Yellow
Alemite® 317400 Straight Top Vent Pressure Relief Fitting, 1/8 in PTF SAE Special Short Thread, 1/2 in OAL, 7/16 in L Shank, Carbon Steel, Zinc Yellow
Leviton® L7505 Straight Single Weave Wide Range Wire Mesh Strain Relief Grip, 1 in Trade, 0.7 to 0.97 in Cable Openings, Steel, Galvanized
Leviton® wire mesh safety grips are built tough to provide the strength, reliability and gripping force required for today's demanding wire management applications. They are designed to distribute stress over a large area so they can securely hold, pull or support the wire, rope, tubing or fiber optic cable to which they are applied. Leviton® wire mesh safety grips are flexible holding devices used to pull cable, rope or tubing into place, to support it after it has been installed, to prevent cable pullout or to provide strain relief that reduces the arc of bend at points of wire connections or terminations. Available in a wide selection of style, weave, attachment and wire options designed to meet the highest standards for strength, flexibility, durability and longevity.
Dixon® AM10 Air King™ Triple Connection Coupling, Iron, Domestic
Dixon® AM10 Air King™ Triple Connection Coupling, Iron, Domestic
